P0016 Hyundai Code - Crankshaft Position-Camshaft Position Correction- Bank 1 Sensor 'A'
Quick Answer
The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 Hyundai indicates Crankshaft Position-Camshaft Position Correction- Bank 1 Sensor 'A'.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 Hyundai Description
The deviation of the camshaft position from the target point is evaluated during stable driving condition. The Engine Control Module (ECM) accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM.
What are the Possible Causes of the DTC P0016 Hyundai?
- Dirty Oil
- Low engine oil level
- Faulty Valve Timing Control (VTC)
- Valve Timing Control (VTC) harness is open or shorted circuit.
- Valve Timing Control (VTC) circuit poor electrical connector
- Incorrect timing
- Engine mechanical problems
- Damaged Engine Control Module (ECM)
How to Fix the DTC P0016 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Hyundai Accent (MC)
Hyundai 2003-2006 SULEV Elantra (XD)
Hyundai 2004-2008 Tiburon 2.0L (GK)
Hyundai Tucson 2.0L (JM)
Hyundai Elantra (HD)
Hyundai Elantra Touring (FD)
Hyundai Genesis Coupe (BK)
Hyundai Sonata (NF)
Hyundai Santa Fe
Hyundai Sonata (NF)
Hyundai Santa Fe (CM)
Hyundai Azera (TG)
Hyundai Veracruz (EN)
Hyundai Entourage (EP),
Hyundai Genesis Coupe (BK)
Hyundai Genesis Sedan (BH)Genesis Sedan (BH)
The bulletin provides information on how to inspect and diagnose problems related to the Oil Control Valve (OCV) used in Constant Variable Valve Timing (CVVT), if at any time the OCV is suspected as the caused of rough idling, poor acceleration, camshaft timing misalignment-related trouble codes, misfire-related trouble codes.
Factory Service Bulletin: Hyundai Constant Variable Valve Timing Oil Control Valve Inspection OBDII Code P0016
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 Hyundai code?
Need more information on how to fix the P0016 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 Hyundai Code
1. What are the common symptoms of OBDII code P0016 in a Hyundai?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and difficulty starting the vehicle.
2. What are the possible causes of OBDII code P0016 in a Hyundai?
- Possible causes include a faulty camshaft or crankshaft position sensor, timing chain issues, engine misalignment, or a problem with the Variable Valve Timing (VVT) system.
3. How can I diagnose OBDII code P0016 in my Hyundai?
- Diagnosis typically involves checking the camshaft and crankshaft position sensors, inspecting the timing chain for wear or misalignment, and testing the VVT system for proper functionality.
4. Is it safe to continue driving with OBDII code P0016 present in a Hyundai?
- It is not recommended to continue driving with this code present as it can lead to further engine damage and potential safety hazards.
5. How can OBDII code P0016 in a Hyundai be repaired?
- Repair options may include replacing the camshaft or crankshaft position sensor, repairing or replacing the timing chain, realigning the engine components, or addressing issues with the VVT system.
6. Can a DIY enthusiast fix OBDII code P0016 in a Hyundai?
- While some aspects of the repair may be possible for a skilled DIY enthusiast, properly diagnosing and repairing this code often requires specialized tools and expertise, so professional assistance is recommended.
7. Are there any preventive maintenance tips to avoid OBDII code P0016 in a Hyundai?
- Regularly scheduled maintenance, such as timely oil changes and inspections of the timing components, can help prevent issues that may trigger this code.
8. How long does it typically take to repair OBDII code P0016 in a Hyundai?
- Repair times can vary depending on the specific cause of the code and the extent of the damage, but it may take a few hours to a full day for a professional mechanic to diagnose and fix the issue.
9. Will resetting the OBDII code P0016 in a Hyundai make it go away permanently?
- Simply resetting the code without addressing the underlying issue will not make it go away permanently. It is crucial to diagnose and repair the root cause to prevent the code from reappearing.
10. Can OBDII code P0016 in a Hyundai cause permanent damage if left untreated?
- Yes, if left untreated, OBDII code P0016 can cause permanent damage to the engine, leading to costly repairs or even engine failure.
Discuss the causes and fixes for P0016 Hyundai OBDII Code
-
hi
i have hyundai veracrus model 2011 there is a problem in engine motor when i go and stopped the car turn it off alone and there is no engine seirvce light turn off not on when i start the vheicle but when i scan the car by daignostic scanner there 1 fult code P0016 and there is a missfire in the car for note we rplace bistones for engine
best regards -
P0016 HYUNDAI - Crankshaft Position-Camshaft Position Correction- Bank 1 Sensor 'A'
Read more: https://www.autocodes.com/p...
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
