P2770 Code - Torque Converter Clutch Circuit High
Quick Answer
The torque converter clutch solenoid valve is activated, with the gear in D4, by the Transmission Control Module (TCM) in response to signals sent from the vehicle speed and the Engine Control Module (ECM). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty torque converter clutch solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2770 indicates Torque Converter Clutch Circuit High.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty torque converter clutch solenoid valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2770 Description
Lock-up operation, however, is prohibited when A/T fluid temperature is too low.
When the accelerator pedal is depressed (less than 2/8) in lock-up condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.
What are the Possible Causes of the DTC P2770?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness is open or shorted
- Torque converter clutch solenoid valve circuit poor electrical connection
How to Fix the DTC P2770?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2770 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2770 code?
Need more information on how to fix the P2770 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2770 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2770 Acura — Torque Converter Clutch Solenoid Valve Circuit (Open)
- P2770 Dodge — Torque Converter Clutch Circuit High
- P2770 Honda — Open in Torque Converter Clutch Solenoid Valve Circuit
- P2770 Lexus — Open in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL
- P2770 Scion — Open in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL
- P2770 Toyota — Open in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL
Frequently Asked Questions about P2770 Code
1. What are the common symptoms of OBDII code P2770 (Torque Converter Clutch Circuit High)?
The common symptoms include engine stalling at idle, harsh shifting, decreased fuel efficiency, and the Check Engine light being illuminated.
2. What are the possible causes of OBDII code P2770?
Possible causes of this code include a faulty torque converter clutch solenoid, damaged wiring or connectors in the circuit, low transmission fluid levels, or a malfunctioning PCM.
3. How can I diagnose the issue causing OBDII code P2770?
Diagnosing the issue involves inspecting the torque converter clutch solenoid, checking the wiring and connectors for damage, ensuring proper transmission fluid levels, and using a scan tool to monitor the circuit operation.
4. Can a DIYer repair OBDII code P2770 at home?
Repairing this code may require some expertise. DIYers can attempt to replace the torque converter clutch solenoid or repair damaged wiring, but for more complex issues, it's recommended to consult a professional mechanic.
5. Will driving with OBDII code P2770 cause further damage to my vehicle?
Continuing to drive with this code may lead to increased wear on the transmission components and potentially cause further damage over time. It's best to address the issue promptly.
6. How much does it typically cost to repair OBDII code P2770?
The cost of repairing this code can vary depending on the underlying issue, but it may range from $200 to $600, including parts and labor.
7. Can resetting the Check Engine light make OBDII code P2770 go away?
Resetting the Check Engine light will clear the code temporarily, but if the underlying issue triggering the code is not addressed, it is likely to reappear after some driving cycles.
8. Are there any preventive measures to avoid OBDII code P2770 in the future?
Regularly servicing the transmission, checking fluid levels, and addressing any transmission-related issues promptly can help prevent the occurrence of this code.
9. Is it safe to continue driving my vehicle if OBDII code P2770 is intermittent?
Intermittent codes should still be taken seriously, as they indicate an underlying issue that may worsen over time. It's advisable to have the vehicle inspected by a mechanic to prevent potential damage.
10. Can a bad torque converter cause OBDII code P2770?
A faulty torque converter itself may not directly cause this code, but issues with the torque converter clutch or related components can trigger OBDII code P2770.
Discuss the causes and fixes for P2770 OBDII Code
Code P2770 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
