P2637 Code - Torque Management Feedback Signal 'A'
Quick Answer
To improve shift, feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2637 indicates Torque Management Feedback Signal 'A'.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2637 Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). Other DTCs will be set before this code if a CAN fault occurs.
The ECM sets the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2637?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module software update
- Transmission Control Module software update
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC P2637?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2637 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2637 code?
Need more information on how to fix the P2637 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2637 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2637 Buick — Torque Management Feedback Signal 'A'
- P2637 Cadillac — Torque Management Feedback Signal 'A'
- P2637 Chevrolet — Torque Management Feedback Signal 'A'
- P2637 Chrysler — Torque Management Feedback Signal 'A'
- P2637 Dodge — Torque Management Feedback Signal 'A'
- P2637 Ford — Torque Management Feedback Signal 'A'
- P2637 GMC — Torque Management Feedback Signal 'A'
- P2637 Saturn — Torque Management Feedback Signal 'A'
Frequently Asked Questions about P2637 Code
1. What are the common symptoms of OBDII code P2637?
- Common symptoms of P2637 include reduced engine power, hesitation during acceleration, and illuminated Check Engine Light.
2. What can cause the OBDII code P2637 to trigger?
- The code P2637 is typically triggered by issues with the torque management feedback signal circuit 'A', such as damaged wiring, poor connections, or a faulty torque management sensor.
3. How can I diagnose the OBDII code P2637?
- Diagnosing P2637 involves checking the wiring and connections related to the torque management feedback signal 'A', as well as testing the torque management sensor for proper functionality.
4. Can a dirty throttle body cause OBDII code P2637?
- While a dirty throttle body can lead to performance issues, it is not a direct cause of P2637. The code is specifically related to the torque management feedback signal circuit 'A'.
5. Is it safe to continue driving with OBDII code P2637 present?
- It is not recommended to drive with P2637 present, as it can affect the performance and drivability of the vehicle. It's best to address the issue promptly to avoid potential further damage.
6. How can I repair OBDII code P2637?
- Repairing P2637 involves identifying and resolving the underlying issue with the torque management feedback signal circuit 'A'. This may include repairing or replacing damaged wiring, connectors, or the torque management sensor.
7. Can I reset the Check Engine Light after fixing OBDII code P2637?
- Yes, once the underlying issue causing P2637 is repaired, the Check Engine Light can be reset using an OBDII scanner to clear the code.
8. Are there any DIY tips for resolving OBDII code P2637?
- DIY tips for P2637 include checking for visible damage to wiring, ensuring secure connections, and performing a visual inspection of the torque management sensor. However, for a proper diagnosis and repair, professional assistance may be required.
9. How long does it typically take to repair OBDII code P2637?
- The repair time for P2637 can vary depending on the exact cause of the issue and the complexity of the repair. In general, it may take a few hours to a full day to diagnose and fix the problem.
10. Can a mechanic help me fix OBDII code P2637?
- Yes, a qualified mechanic with experience in diagnosing and repairing automotive electrical issues can help you fix OBDII code P2637 efficiently and effectively.
Discuss the causes and fixes for P2637 OBDII Code
Code P2637 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
