P2637 Buick Code - Torque Management Feedback Signal 'A'
Quick Answer
To improve shift, feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2637 Buick indicates Torque Management Feedback Signal 'A'.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2637 Buick Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). Other DTCs will be set before this code if a CAN fault occurs.
The ECM sets the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2637 Buick?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module software update
- Transmission Control Module software update
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC P2637 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2637 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2637 Buick code?
Need more information on how to fix the P2637 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2637 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2637 Buick Code
1. What does OBDII code P2637 mean for a Buick?
Code P2637 indicates an issue with the Torque Management Feedback Signal 'A', which means the vehicle's control module is detecting an abnormal signal related to torque management.
2. What are common symptoms of code P2637 in a Buick?
Symptoms include reduced engine performance, poor acceleration, transmission shifting issues, and the Check Engine Light being illuminated.
3. What causes code P2637 in a Buick?
Common causes include a faulty torque management sensor, wiring or connection issues, a failing control module, or a problem with the transmission or engine torque signals.
4. Can I drive my Buick with code P2637 present?
Driving with code P2637 is not recommended, as it can impact engine performance and potentially cause further damage to the transmission or related components.
5. How is code P2637 diagnosed on a Buick?
Technicians diagnose this code by using an OBDII scanner, inspecting wiring and connectors, testing the torque management sensor, and verifying the control module’s operation.
6. How do I fix code P2637 in a Buick?
Repairs may include replacing the torque management sensor, repairing damaged wiring or connectors, updating or reprogramming the control module, or addressing transmission-related issues.
7. Does code P2637 affect fuel efficiency in a Buick?
Yes, this code can reduce fuel efficiency due to improper torque management and engine performance issues.
8. How much does it cost to repair code P2637 on a Buick?
Repair costs vary depending on the specific issue, but can range from $100 for minor wiring repairs to over $1,000 for sensor or control module replacement.
9. Will clearing the code P2637 solve the problem?
Simply clearing the code will not fix the underlying issue; proper diagnosis and repair are necessary to prevent the code from returning.
10. Can a failing transmission cause code P2637 on a Buick?
Yes, transmission issues that disrupt torque management signals can trigger code P2637.
Discuss the causes and fixes for P2637 Buick OBDII Code
Code P2637 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
