P2290 Code - Injector Control Pressure Too Low
Quick Answer
The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2290 indicates Injector Control Pressure Too Low.
- Common causes
- Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2290 Description
The ICP sensor is a variable capacitance sensor that, when supplied with a 5-volts reference signal from the PCM, produces a linear analog voltage signal that indicates pressure.
The ICP sensor's primary function is to provide a feedback signal to indicate rail pressure so that the PCM con command the correct injector timing and pulse width and the correct injection control pressure for the proper fuel delivery at all speed and load conditions.
What are the Possible Causes of the DTC P2290?
- Faulty Injector Control Pressure (ICP) sensor
- Injector Control Pressure (ICP) sensor harness is open or shorted
- Injector Control Pressure (ICP) sensor circuit poor electrical connection
How to Fix the DTC P2290?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2290 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2290 code?
Need more information on how to fix the P2290 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2290 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2290 Audi — Injector Control Pressure Too Low
- P2290 BMW — Injector Control Pressure Too Low
- P2290 Dodge — Injector Control Pressure Too Low
- P2290 Ford — Injector Control Pressure Too Low
- P2290 Land Rover — Injector Control Pressure Too Low
- P2290 Volkswagen — Injector Control Pressure Too Low
Frequently Asked Questions about P2290 Code
1. What are the common symptoms of OBDII code P2290 (Injector Control Pressure Too Low)?
- Common symptoms include rough idling, loss of power, engine stalling, and decreased fuel efficiency.
2. What are the possible causes of OBDII code P2290?
- The code P2290 can be caused by issues such as a faulty fuel injector, low fuel pressure, clogged fuel filter, or a malfunctioning fuel pump.
3. How can I diagnose the cause of OBDII code P2290?
- To diagnose the cause of P2290, you can use a scan tool to check for other related codes, perform a fuel pressure test, inspect the fuel injectors, and check for any leaks in the fuel system.
4. What are some repair tips for addressing OBDII code P2290?
- Repair tips for code P2290 may include replacing the faulty fuel injector, addressing any fuel system leaks, checking and replacing the fuel filter, and ensuring proper fuel pressure.
5. Can driving with OBDII code P2290 cause further damage to my vehicle?
- Continuing to drive with code P2290 can potentially cause damage to other engine components such as the catalytic converter and oxygen sensors, leading to more expensive repairs.
6. How much does it typically cost to repair OBDII code P2290?
- The cost of repairing code P2290 can vary depending on the specific cause of the issue, but it may range from $200 to $800, including parts and labor.
7. Is it safe to continue driving my vehicle with OBDII code P2290?
- It is not recommended to drive your vehicle with code P2290, as it can lead to poor engine performance, increased emissions, and potential engine damage.
8. Can a DIY enthusiast fix OBDII code P2290 at home?
- Depending on your level of automotive knowledge and experience, some DIY enthusiasts may be able to diagnose and repair code P2290 at home, especially if the issue is related to a simple fix like a clogged fuel filter.
9. How long does it take to repair OBDII code P2290?
- The repair time for code P2290 can vary based on the specific cause and complexity of the issue, but it typically takes a few hours to a full day to diagnose and fix the problem.
10. Will resetting the OBDII code P2290 make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing code P2290 is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P2290 OBDII Code
Code P2290 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
