AutoCodes – Dodge – P2290 Dodge

P2290 Dodge Code - Injector Control Pressure Too Low

Quick Answer

The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2290 Dodge indicates Injector Control Pressure Too Low.
Common causes: Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,218

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2290 Dodge Description

The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. The code sets when the signal from the sensor is out of factory specifications, and the PCM will go to open loop control of injection control pressure (operate from an estimated injection control pressure).
The ICP sensor is a variable capacitance sensor that, when supplied with a 5-volts reference signal from the PCM, produces a linear analog voltage signal that indicates pressure.
The ICP sensor's primary function is to provide a feedback signal to indicate rail pressure so that the PCM con command the correct injector timing and pulse width and the correct injection control pressure for the proper fuel delivery at all speed and load conditions.

OBDII Code P2290 Dodge - Injector Control Pressure Too Low - AutoCodes.com — P2290 Dodge Code - Injector Control Pressure Too Low

What does this mean?

What are the Possible Causes of the DTC P2290 Dodge?

Faulty Injector Control Pressure (ICP) sensor
Injector Control Pressure (ICP) sensor harness is open or shorted
Injector Control Pressure (ICP) sensor circuit poor electrical connection

How to Fix the DTC P2290 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2290 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2290 Dodge code?

Need more information on how to fix the P2290 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2290 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2290 Dodge Code

What does the OBDII code P2290 mean for a Dodge vehicle?

The OBDII code P2290 indicates that the engine control module (ECM) has detected that the injector control pressure is too low, which can affect fuel delivery and engine performance.

What are common symptoms of the P2290 code?

Common symptoms include rough idling, poor acceleration, stalling, decreased fuel efficiency, and a check engine light illuminated on the dashboard.

What could cause the P2290 code to trigger?

Potential causes include a faulty fuel injector, a malfunctioning fuel pump, a clogged fuel filter, low fuel pressure, or issues with the fuel pressure regulator.

How can I diagnose the P2290 code?

To diagnose the P2290 code, start by checking the fuel pressure with a gauge, examining the fuel injectors for proper operation, and inspecting the wiring and connectors related to the fuel system.

What repairs are commonly recommended for P2290?

Repairs may include replacing faulty fuel injectors, repairing or replacing the fuel pump, cleaning or replacing the fuel filter, or addressing any leaks in the fuel system.

Can I drive my vehicle if the P2290 code is present?

While you may be able to drive the vehicle with the P2290 code, it is not advisable as it can lead to further engine damage or decreased performance. It's best to diagnose and repair the issue promptly.

Will clearing the P2290 code fix the problem?

Clearing the P2290 code may temporarily turn off the check engine light, but it will not fix the underlying issue that caused the code to trigger. Proper diagnosis and repair are necessary.

Is it safe to ignore the P2290 code?

Ignoring the P2290 code is not safe, as it can lead to more serious engine issues and potentially result in unsafe driving conditions due to poor engine performance.

Could a bad sensor cause the P2290 code?

Yes, a malfunctioning sensor, particularly related to fuel pressure or injector control, can lead to the P2290 code triggering by providing inaccurate readings to the ECM.