AutoCodes – Generic – P1710

P1710 Code - First Hold Switch Circuit Fault Stuck On

Quick Answer

P1710 indicates First Hold Switch Circuit Fault Stuck On. Common causes include Faulty Gear Selection Switch, Gear Selection Switch harness is open or shorted, Gear Selection Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1710 indicates First Hold Switch Circuit Fault Stuck On.
Common causes: Common causes include Faulty Gear Selection Switch, Gear Selection Switch harness is open or shorted, Gear Selection Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,080

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1710 Description

OBDII Code P1710 - First Hold Switch Circuit Fault Stuck On - AutoCodes.com — P1710 Code - First Hold Switch Circuit Fault Stuck On

What does this mean?

What are the Possible Causes of the DTC P1710?

Faulty Gear Selection Switch
Gear Selection Switch harness is open or shorted
Gear Selection Switch circuit poor electrical connection

How to Fix the DTC P1710?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1710 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1710 code?

Need more information on how to fix the P1710 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1710 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1710 Acura — First Hold Switch Circuit Fault Stuck On
P1710 Ford — No Change In Transmission Fluid Temperature Signal
P1710 Honda — First Hold Switch Circuit Fault Stuck On
P1710 Hyundai — Oil Temperature Sensor
P1710 Infiniti — Automatic Transmission Fluid Temperature Sensor Circuit.
P1710 Nissan — Automatic Transmission Fluid Temperature Sensor Circuit.
P1710 Subaru — TC Turbine Speed Sensor 2
P1710 Suzuki — Back-Up Vehicle Speed Sensor Circuit Malfunction

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1710 Code

1. What are the common symptoms of OBDII code P1710 (First Hold Switch Circuit Fault Stuck On)?

- Common symptoms include the Check Engine Light turning on, difficulty shifting gears, and potential transmission performance issues.

2. What causes the OBDII code P1710 to trigger?

- The code P1710 typically triggers due to a fault in the first hold switch circuit, which may be caused by a faulty first hold switch or wiring issues.

3. How serious is the OBDII code P1710?

- The seriousness of the code P1710 depends on the underlying issue. Ignoring the problem can potentially lead to transmission damage and further drivability issues.

4. Can I continue driving with OBDII code P1710 present?

- It is not recommended to continue driving with the code P1710 present, as it can lead to further damage to the transmission or other related components.

5. How can I diagnose the OBDII code P1710?

- Diagnosing the code P1710 involves using a diagnostic scanner to retrieve the code, followed by inspecting the first hold switch circuit and related components for faults.

6. What are some repair tips for fixing OBDII code P1710?

- Repair tips may include checking and replacing the first hold switch, inspecting and repairing any damaged wiring, and clearing the code to see if the issue persists.

7. Can resetting the OBDII code P1710 resolve the issue?

- Resetting the code may temporarily turn off the Check Engine Light, but it will not fix the underlying issue causing the code to trigger.

8. How much does it cost to repair OBDII code P1710?

- The cost of repairing the code P1710 can vary depending on the exact cause of the issue, the labor rates in your area, and the cost of any replacement parts needed.

9. Is it possible to prevent OBDII code P1710 from occurring?

- Regular maintenance and inspections of the transmission system can help prevent issues that may lead to the code P1710 from occurring.

10. Can a DIY enthusiast fix OBDII code P1710 at home?

- While some DIY enthusiasts may be able to diagnose and repair the code P1710, it is recommended to seek professional help, especially when dealing with transmission-related issues.