P1710 Subaru Code - TC Turbine Speed Sensor 2
Quick Answer
P1710 Subaru indicates TC Turbine Speed Sensor 2. Common causes include Faulty Turbine Speed Sensor, Turbine Speed Sensor harness is open or shorted, Turbine Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1710 Subaru indicates TC Turbine Speed Sensor 2.
- Common causes
- Common causes include Faulty Turbine Speed Sensor, Turbine Speed Sensor harness is open or shorted, Turbine Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1710 Subaru Description
What are the Possible Causes of the DTC P1710 Subaru?
- Faulty Turbine Speed Sensor
- Turbine Speed Sensor harness is open or shorted
- Turbine Speed Sensor circuit poor electrical connection
How to Fix the DTC P1710 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1710 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1710 Subaru code?
Need more information on how to fix the P1710 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1710 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1710 Subaru Code
1. What are common symptoms of OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Common symptoms include rough shifting, hesitation during acceleration, and potential transmission slipping.
2. What are the possible causes of OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Potential causes include a faulty turbine speed sensor, damaged wiring or connectors, low transmission fluid, or internal transmission issues.
3. How can I diagnose the OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Diagnosis involves using a scan tool to read the code, inspecting the turbine speed sensor and its wiring, checking transmission fluid levels, and performing a road test to observe symptoms.
4. Can I drive my Subaru with OBDII code P1710 related to the TC Turbine Speed Sensor 2?
- It is not recommended to drive the vehicle with this code as it can lead to further damage to the transmission. It is best to address the issue promptly.
5. What are the repair options for OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Repair options include replacing the faulty turbine speed sensor, repairing damaged wiring or connectors, ensuring proper transmission fluid levels, and seeking professional help for internal transmission repairs if needed.
6. Is it possible to reset the OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- While you can clear the code using a scan tool, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. How critical is it to address OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- It is crucial to address this code promptly to prevent potential transmission damage and ensure the safe operation of the vehicle.
8. Can a DIY enthusiast repair OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Depending on the exact cause, DIY enthusiasts may be able to replace the turbine speed sensor or repair wiring issues. However, complex transmission repairs may require professional assistance.
9. Are there any preventive measures to avoid OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- Regular maintenance, such as checking transmission fluid levels and addressing any warning signs promptly, can help prevent issues leading to this code.
10. How long does it typically take to repair OBDII code P1710 in a Subaru related to the TC Turbine Speed Sensor 2?
- The repair time can vary based on the exact cause of the code and the complexity of the repair needed. Simple fixes like sensor replacement may take a few hours, while more involved repairs could take longer.
Discuss the causes and fixes for P1710 Subaru OBDII Code
-
my check egin light can on along with my cruse control and my antiskid light want go out
-
I repaired this by replacing the sensor. Sensor can be found here: eBay item number: 133239156024
-
I have a 2008 Legacy with P1710 code. My son replaced the sensor and reset all error codes. The car ran smoothly for about a month and yesterday the same code and hard shifting returned. Continued to "crawl" for few blocks and suddenly the car returned back to normal. At home checked with OBDII and found P1710 logged but the speed sensor 2 has live rpm that means it is working. My worries is will it happens again and when? It becomes a ticking time bomb! Should I replaced the sensor again? Any suggestions are welcome! Thanks ahead.
-
The fact that the transmission worked normally for a month after replacing the sensor tells me the original repair may have helped, but I wouldn't automatically replace the sensor again just because the code returned.
Since you're seeing a live RPM signal from Speed Sensor 2, the sensor is at least working at the moment. What I would be looking at next is the wiring and connector between the sensor and the transmission control module. An intermittent open, loose terminal, corrosion, or damaged wire can cause the signal to drop out briefly, set P1710, and put the transmission into a fail-safe mode with harsh shifting. Once the connection comes back, the transmission can start acting normally again.
If it were my car, I would inspect the sensor connector and harness very carefully before buying another sensor. Pay close attention to places where the harness bends or may have rubbed against the transmission. If the wiring checks out, then it may be worth monitoring the sensor signal with a scan tool while driving to see if it drops out when the problem occurs. The intermittent nature of the fault makes me suspect a connection issue more than a bad sensor.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
