AutoCodes – Generic – P1382

P1382 Code - Cylinder Position Sensor 1 No Signal

Quick Answer

The Crankshaft Position (CKP) Sensor determines the timing for fuel injection and ignition of each cylinder and also detects engine speed. Common causes include Faulty Cylinder Position Sensor, Cylinder Position Sensor harness is open or shorted, Cylinder Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1382 indicates Cylinder Position Sensor 1 No Signal.
Common causes: Common causes include Faulty Cylinder Position Sensor, Cylinder Position Sensor harness is open or shorted, Cylinder Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 26,202

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 23, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1382 Description

The Crankshaft Position (CKP) Sensor determines the timing for fuel injection and ignition of each cylinder and also detects engine speed. The Top Dead Center (TDC) Sensor determines ignition timing at start-up (cranking) and when the crank angle is abnormal. The Cylinder Position (CYP) Sensor detects the position of the No. 1 cylinder for the sequential fuel injection to each cylinder. The CKP/TDC/CYP sensors are built into the distributor. If no cylinder position (CYP) sensor pulsing signals are detected, a malfunction is detected, and the P1382 Diagnostic Trouble Code (DTC) is stored.

OBDII Code P1382 - Cylinder Position Sensor 1 No Signal - AutoCodes.com — P1382 Code - Cylinder Position Sensor 1 No Signal

What does this mean?

What are the Possible Causes of the DTC P1382?

Faulty Cylinder Position Sensor
Cylinder Position Sensor harness is open or shorted
Cylinder Position Sensor circuit poor electrical connection

How to Fix the DTC P1382?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1382 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1382 code?

Need more information on how to fix the P1382 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1382 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1382 Acura — Cylinder Position Sensor 1 No Signal
P1382 Honda — Cylinder Position Sensor 1 No Signal
P1382 Isuzu — Cylinder Position Sensor 1 No Signal
P1382 Mazda — Camshaft Position Timing Solenoid 1 Circuit
P1382 Suzuki — Wheel Speed Sensor Malfunction

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1382 Code

1. What are the common symptoms of OBDII code P1382 (Cylinder Position Sensor 1 No Signal)?

- Common symptoms include rough idling, poor engine performance, misfires, and difficulty starting the engine.

2. What are the possible causes of OBDII code P1382?

- The code P1382 can be triggered by a faulty cylinder position sensor, damaged wiring or connectors, or a problem with the engine's timing system.

3. How can I diagnose the cause of OBDII code P1382?

- To diagnose code P1382, it is recommended to perform a visual inspection of the sensor and its wiring, test the sensor's resistance, and check the engine's timing marks.

4. Can a faulty cylinder position sensor cause OBDII code P1382?

- Yes, a faulty cylinder position sensor is a common cause of OBDII code P1382, as it fails to provide the necessary signal to the engine control module.

5. What repair tips can help resolve OBDII code P1382?

- Repair tips include replacing the faulty cylinder position sensor, repairing damaged wiring or connectors, and ensuring proper alignment of the engine's timing system.

6. Is it safe to continue driving with OBDII code P1382 active?

- It is not recommended to continue driving with OBDII code P1382 active, as it can lead to further engine damage and potential safety hazards.

7. Can OBDII code P1382 be reset without fixing the underlying issue?

- While you can clear the code temporarily, it is important to address the underlying issue causing OBDII code P1382 to prevent it from recurring.

8. How much does it typically cost to repair OBDII code P1382?

- The cost of repairing OBDII code P1382 can vary depending on the cause of the issue, but it may involve sensor replacement, wiring repairs, or timing system adjustments.

9. Will OBDII code P1382 cause my vehicle to fail an emissions test?

- Yes, OBDII code P1382 can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems.

10. How can I prevent OBDII code P1382 from appearing in the future?

- To prevent OBDII code P1382, it is important to perform regular maintenance on your vehicle, address any issues promptly, and follow the manufacturer's recommended service schedule.