P1103 Code - MAP Sensor High Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). Common causes include Faulty Manifold Absolute Pressure (MAP), Manifold Absolute Pressure (MAP) harness is open or shorted, Manifold Absolute Pressure (MAP) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1103 indicates MAP Sensor High Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP), Manifold Absolute Pressure (MAP) harness is open or shorted, Manifold Absolute Pressure (MAP) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1103 Description
What are the Possible Causes of the DTC P1103?
- Faulty Manifold Absolute Pressure (MAP)
- Manifold Absolute Pressure (MAP) harness is open or shorted
- Manifold Absolute Pressure (MAP) circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1103?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1103 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1103 code?
Need more information on how to fix the P1103 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1103 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1103 Acura — Mass Airflow Sensor Higher Than Expected
- P1103 Audi — HO2S Heating Circuit Bank 1 Sensor 1 Voltage Too Low
- P1103 Buick — Water In Fuel Signal Message Counter Incorrect
- P1103 Cadillac — Water In Fuel Signal Message Counter Incorrect
- P1103 Chevrolet — Water In Fuel Signal Message Counter Incorrect
- P1103 GMC — Water In Fuel Signal Message Counter Incorrect
- P1103 Honda — Mass Airflow Sensor Higher Than Expected
- P1103 Hyundai — Manifold Absolute Pressure Sensor Malfunction - High Voltage
- P1103 Infiniti — MAP Sensor High Voltage
- P1103 KIA — Manifold Absolute Pressure Sensor Malfunction - High Voltage
- P1103 Land Rover — Mass Or Volume Airflow Supply High
- P1103 Mazda — MAF Inconsistent With TP Sensor
- P1103 Mitsubishi — Turbocharger Wastegate Actuator
- P1103 Nissan — MAP Sensor High Voltage
- P1103 Subaru — Pressure Sources Switching Solenoid Valve Circuit
- P1103 Volkswagen — HO2S Heating Circuit Bank 1 Sensor 1 Voltage Too Low
Frequently Asked Questions about P1103 Code
1. What are the common symptoms of OBDII code P1103 (MAP Sensor High Voltage)?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and potential stalling.
2. What can cause OBDII code P1103 to trigger?
- The code may be triggered by a faulty MAP (Manifold Absolute Pressure) sensor, a wiring issue in the MAP sensor circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the root cause of OBDII code P1103?
- To diagnose the issue, you can use a scan tool to read the code, check the MAP sensor's voltage output, inspect the wiring for any damage, and perform a vacuum test on the sensor.
4. Can a dirty or clogged MAP sensor cause code P1103?
- Yes, a dirty or clogged MAP sensor can cause the code to trigger as it may not be able to accurately measure the intake manifold pressure.
5. What are some repair tips for resolving OBDII code P1103?
- Repair tips include cleaning or replacing the MAP sensor, repairing any damaged wiring, ensuring proper vacuum connections, and resetting the ECM after the repair.
6. Is it safe to continue driving with OBDII code P1103 present?
- It is not recommended to continue driving with the code present, as it can lead to poor engine performance and potential further damage if left unresolved.
7. Can a DIY enthusiast fix OBDII code P1103 at home?
- Depending on the cause, a DIY enthusiast with some automotive knowledge and tools may be able to fix the issue themselves by following repair guides or tutorials.
8. How much does it typically cost to repair OBDII code P1103 at a mechanic or dealership?
- The cost of repairing OBDII code P1103 can vary depending on the root cause of the issue, but it can range from $100 to $500 at a mechanic or dealership.
9. Will resetting the fault codes make OBDII code P1103 disappear permanently?
- Simply resetting the fault codes may temporarily turn off the check engine light, but if the underlying issue causing P1103 is not resolved, the code is likely to reappear.
10. How urgent is it to address OBDII code P1103 (MAP Sensor High Voltage)?
- It is recommended to address the issue promptly to prevent further damage to the engine and ensure optimal performance and fuel efficiency.
Discuss the causes and fixes for P1103 OBDII Code
Code P1103 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
