P1103 NISSAN - MAP Sensor High Voltage
P1103 NISSAN Possible Causes
- Faulty Manifold Absolute Pressure (MAP)
- Manifold Absolute Pressure (MAP) harness is open or shorted
- Manifold Absolute Pressure (MAP) circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code P1103 NISSAN
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1103 NISSAN code
Labor: 1.0The cost of diagnosing the P1103 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P1103 NISSAN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1103 Nissan DescriptionThe Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.The MAP/BARO Switch solenoid valve switches it's air flow passage according to the voltage signal sent from the ECM.
In some Nissan vehicles the absolute pressure sensor is built into ECM.
P1103 NISSAN More InformationNeed more information on how to fix the P1103 NISSAN code?
Get Access to Factory Service Manuals
P1103 Nissan Information for specific Nissan models
Need more help?Get the P1103 Nissan code diagnosed by a professional: Find a repair shop in your area
P1103 NISSAN CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1103 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks