P0987 Code - Transmission Fluid Pressure Sensor/Switch 'E' Circuit
Quick Answer
The Transmission Control Module (TCM) monitors the Transmission Fluid Pressure Sensor/Switch signal. Common causes include Faulty Transmission Fluid Pressure Sensor/Switch 'E', Transmission Fluid Pressure Sensor/Switch 'E' harness is open or shorted, Transmission Fluid Pressure Sensor/Switch 'E' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0987 indicates Transmission Fluid Pressure Sensor/Switch 'E' Circuit.
- Common causes
- Common causes include Faulty Transmission Fluid Pressure Sensor/Switch 'E', Transmission Fluid Pressure Sensor/Switch 'E' harness is open or shorted, Transmission Fluid Pressure Sensor/Switch 'E' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0987 Description
What are the Possible Causes of the DTC P0987?
- Faulty Transmission Fluid Pressure Sensor/Switch 'E'
- Transmission Fluid Pressure Sensor/Switch 'E' harness is open or shorted
- Transmission Fluid Pressure Sensor/Switch 'E' circuit poor electrical connection
How to Fix the DTC P0987?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0987 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0987 code?
Need more information on how to fix the P0987 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0987 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0987 Dodge — 4C Hydraulic Pressure Test
- P0987 Jeep — 4C Hydraulic Pressure Test
Frequently Asked Questions about P0987 Code
No Frequently Asked Questions about P0987 Code found.
Discuss the causes and fixes for P0987 OBDII Code
-
2008 Jeep Commander. Code reading is P0987, Transmission Fluid Pressure sensor/Switch E Circuit. Check engine light is on. Three times in the past 2 months I've had to pull off the road when starting because the vehicle acts like it's not in gear. I stop, put it in park, and then back into gear. So far this has worked every time. But it's like it doesn't want to catch the gear. Any idea what the code means???? How to repair it????? Does the problem I've had have to do with the code?????
-
You could start by inspecting the transmission fluid level and condition. If the fluid level is OK and the problem persist, you may have to have a transmission shop inspect it for you.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
