P0366 Honda Code - Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
Quick Answer
The Camshaft Position (CMP) Sensor 'B' detects the exhaust camshaft timing and sends pulsing signals to the Powertrain Control Module (PCM). Common causes include Camshaft Position (CMP) Sensor 'B' installation, Faulty Camshaft Position Sensor 'B', Camshaft Position Sensor 'B' harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0366 Honda indicates Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected.
- Common causes
- Common causes include Camshaft Position (CMP) Sensor 'B' installation, Faulty Camshaft Position Sensor 'B', Camshaft Position Sensor 'B' harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0366 Honda Description
What are the Possible Causes of the DTC P0366 Honda?
- Camshaft Position (CMP) Sensor 'B' installation
- Faulty Camshaft Position Sensor 'B'
- Camshaft Position Sensor 'B' harness is open or shorted
- Camshaft Position Sensor 'B' circuit poor electrical connection
- Faulty Variable Valve Timing Control (VTC) Actuator
How to Fix the DTC P0366 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0366 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0366 Honda code?
Need more information on how to fix the P0366 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0366 Honda code diagnosed by a professional: Find a repair shop in your area
Information for Specific Honda Models
- P0366 2016 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
- P0366 2017 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
- P0366 2018 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
- P0366 2019 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
- P0366 2020 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
- P0366 2021 Honda CR-V — Camshaft Position Sensor 'B' and Crankshaft Position Sensor Incorrect Phase Detected
Frequently Asked Questions about P0366 Honda Code
1. What does the OBDII code P0366 mean on a Honda?
P0366 indicates that the Camshaft Position Sensor 'B' and Crankshaft Position Sensor are detecting an incorrect phase, meaning the timing or synchronization between the sensors is off.
2. What are common symptoms of code P0366 on a Honda?
Symptoms may include engine misfires, difficulty starting the vehicle, poor acceleration, reduced fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P0366 code on a Honda?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, issues with the crankshaft position sensor, or timing chain/belt problems.
4. Can I drive my Honda with a P0366 code?
While the car may still run, driving with P0366 could lead to further engine damage or cause the vehicle to stall unexpectedly. It’s best to address the issue promptly.
5. How do I diagnose the P0366 code on my Honda?
Start by checking the camshaft and crankshaft position sensors for damage or wear, inspect the wiring and connectors, and verify the engine timing alignment.
6. How do I fix the P0366 code on a Honda?
Repairs may involve replacing a faulty camshaft or crankshaft position sensor, repairing damaged wiring, or adjusting the engine timing if it’s out of alignment.
7. How much does it cost to repair a P0366 code on a Honda?
Costs vary depending on the repair needed, but replacing a camshaft position sensor typically costs $150-$300, while timing chain repairs can exceed $1,000.
8. Can a dirty engine affect the P0366 code on my Honda?
Yes, excessive sludge or debris in the engine can interfere with sensor readings or affect timing components, potentially triggering the P0366 code.
9. Do I need special tools to fix P0366 on a Honda?
While basic tools like socket wrenches may suffice for sensor replacement, diagnosing timing issues may require specialized tools like a timing light or an OBDII scanner.
10. Will clearing the P0366 code fix the issue on my Honda?
Clearing the code may temporarily turn off the Check Engine Light, but unless the underlying issue is resolved, the code will likely return.
Discuss the causes and fixes for P0366 Honda OBDII Code
Code P0366 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
