P0106 Hyundai Code - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem

How much to fix it

Unfortunately there is not an exact price. It depends the model and year of your vehicle, where do you buy the part, who installs the part and if the problem is the sensor and/or the wires.

okie cute

I have a 2011 Hyundai sonata engine light came on 2 weeks ago and yesterday I've replaced both of the O2 sensors. I have also replaced the spark plugs and all air filters because it is 116K already. when I first start the car check engine light was gone, but after I restarted the check engine like came on. We use the code reader and i got a different code P0106. we checked all the connections was fine. Please advice.

Check the connection to the MAP sensor again, and if the connection is OK, then you may have to replace the sensor.

Hi were you able to fix the problem I am having the same issue with the same year model

Clean the throttle body, error from MAP senor actualy from the throttle body. But not hurt to replace the MAP as well.

I Have same car, had same problem. Diconnected map sensor connection and reconnected...1 min work, no $$ and engine light off; has been great ever since.

Have 2011 Sonata 2.4 Engine: The engine light, coincidentally, came on last night after I picked it up from the dealer (replace the steering wheel coupler). I disconnected the battery to erase memory, but it came back on when I turned the car on. So I took it back this AM and they did the code scan .... the PO106 code came up, of course they said it had nothing to do with what they did ... anyways, they erased the code but warned me that it might come right back on, which it did. They also wanted me to bring back to fix it; But came home and searched the web and saw this discussion. Went outside, removed the sensor (disconnected battery 1st), wiped it with a babywipe (didn't have cleaning spray, and it's cold as hell outside, so wipe had to do) and put it back on. Turned car on, and waited ... no engine light. If it comes back within the next week I'll post an update.
Thank you.

Update: Light came back on ... will go ahead and replace.

Update (11/27/17): Replaced sensor...light came back on as soon as I turned on the car. So went ahead and removed the throttle body and cleaned it. Put it back on and no light; left it running for about 15 min and no light. So decided to put back the original sensor and turned on the car..no light. Left in running for 15min and no lights. It has been two days and I have ran the car hard and far distance (several hrs drive) and no light. So it looks like it was the throttle body. Will update again if the light comes back on. Thanks.

I have a 2011 Hyundai ix35, the engine light comes on and off and it shows the code PO106 after scanning. It jerks while in motion sometimes and sometimes doesn't accelerate while in motion (engine sound goes up like you have the gear in parking and you are accelerating and will suddenly come back on to normal)

Thankyou very much @christopher k hon your suggestion solved my costumer's car problem

P0106 Fehler Hyundai IX35 /2L /2010 MAP ern. Drosselklappe zuvor gereinigt mit Reinige dafür. keine Änderung am Motorlauf, Drehzahl schwangt auf und ab, Motor geht während der Fahrt aus egal
ob 20 Km/h oder 150 km/h, startet danach schlecht, Erster Startversuch kein Erfolg erst bei Zweiten springt er sofort an. das Problem ist bei Benzin und LPG-gas das Gleiche. mehrmals gingen sämtliche Warnlampen an nur war nie ein Fehler hinterlegt als P0106. werde das Steuergerät überprüfen lassen. somit hat dieser Code nicht viel gebracht. ach die einzelnen Zündmodule habe ich auch gewechselt, da bei der Prüfung ein def. festgestellt worden ist, leider waren die vier Neuen Zündmodule auch def. und wurden ausgetauscht von dem Hersteller. Nun geht immer noch die M0torwahrnleuchte an. So geht die Suche weiter. Vieleicht hilft es jemanden.