AutoCodes – Chevrolet – P0057 Chevrolet

P0057 Chevrolet Code - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0057 Chevrolet indicates HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 891

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0057 Chevrolet Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to ground in the heater output low side driver circuit of the heated oxygen sensor when the heater is commanded OFF for greater than 5 s.

OBDII Code P0057 Chevrolet - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2 - AutoCodes.com — P0057 Chevrolet Code - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0057 Chevrolet?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0057 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0057 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0057 Chevrolet code?

Need more information on how to fix the P0057 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0057 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Information for Specific Chevrolet Models

P0057 2014 Chevrolet Silverado — HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2
P0057 2015 Chevrolet Silverado — HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2
P0057 2016 Chevrolet Silverado — HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2
P0057 2017 Chevrolet Silverado — HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2
P0057 2018 Chevrolet Silverado — HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0057 Chevrolet Code

1. What are the common symptoms of OBDII code P0057 in a Chevrolet?

- Common symptoms include poor fuel economy, rough engine idle, engine misfires, and illuminated Check Engine Light.

2. What does the OBDII code P0057 Chevrolet indicate?

- The code indicates a malfunction in the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 2 Sensor 2, specifically low voltage.

3. What are the possible causes of OBDII code P0057 in a Chevrolet?

- Possible causes include a faulty HO2S (Heated Oxygen Sensor) Bank 2 Sensor 2, damaged wiring or connectors, a blown fuse, or a defective ECM (Engine Control Module).

4. How can I diagnose the OBDII code P0057 in my Chevrolet?

- Diagnosis involves using a scan tool to retrieve the code, checking the HO2S Bank 2 Sensor 2 for proper operation, inspecting the wiring and connectors for damage, and testing the heater circuit.

5. Can I drive my Chevrolet with OBDII code P0057?

- It is not recommended to drive with an unresolved P0057 code, as it can lead to decreased fuel efficiency and potential engine performance issues.

6. What is the repair process for OBDII code P0057 in a Chevrolet?

- The repair process involves replacing the HO2S Bank 2 Sensor 2 if faulty, repairing any damaged wiring or connectors, checking and replacing fuses if necessary, and clearing the code with a scan tool.

7. How much does it cost to fix OBDII code P0057 in a Chevrolet?

- The cost of fixing P0057 can vary depending on the cause of the issue. Replacing the HO2S sensor can range from $100 to $300, while addressing wiring or ECM issues may incur additional costs.

8. Are there any DIY tips for resolving OBDII code P0057 in a Chevrolet?

- DIY tips include checking and cleaning the sensor connectors, inspecting the wiring for visible damage, and ensuring proper fuse functionality before seeking professional help.

9. Can a faulty HO2S Bank 2 Sensor 2 trigger other OBDII codes in a Chevrolet?

- Yes, a malfunctioning HO2S sensor can lead to related codes such as P0056 (Heater Control Circuit Bank 2 Sensor 2) or P0058 (Heater Control Circuit High Voltage Bank 2 Sensor 2) in a Chevrolet.

10. How often should I check the HO2S Bank 2 Sensor 2 in my Chevrolet to prevent OBDII code P0057?

- It is recommended to include regular sensor checks during routine maintenance to detect any potential issues early and prevent triggering the P0057 code.