AutoCodes – Chevrolet – P0057 2018 Chevrolet Silverado

P0057 2018 Chevrolet Silverado Code - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0057 2018 Chevrolet Silverado indicates HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 294

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0057 2018 Chevrolet Silverado Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to ground in the heater output low side driver circuit of the heated oxygen sensor when the heater is commanded OFF for greater than 5 s.

OBDII Code P0057 2018 Chevrolet Silverado - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2 - AutoCodes.com — P0057 2018 Chevrolet Silverado Code - HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0057 2018 Chevrolet Silverado?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0057 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0057 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0057 2018 Chevrolet Silverado code?

Need more information on how to fix the P0057 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0057 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0057 2018 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P0057 on a 2018 Chevrolet Silverado?

- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the Check Engine light.

2. What does the OBDII code P0057 "HO2S Heater Control Circuit Low Voltage Bank 2 Sensor 2" mean for a 2018 Chevrolet Silverado?

- This code indicates that there is a low voltage condition in the heater control circuit of the oxygen sensor located on Bank 2 Sensor 2 in the exhaust system.

3. What are the possible causes of OBDII code P0057 on a 2018 Chevrolet Silverado?

- Potential causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or issues with the PCM (Powertrain Control Module).

4. How can I diagnose the issue causing OBDII code P0057 on my 2018 Chevrolet Silverado?

- Diagnostic steps may involve checking the wiring and connectors for damage, testing the oxygen sensor's resistance, inspecting the fuse related to the sensor, and scanning the PCM for any related faults.

5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code P0057 present?

- It is not recommended to continue driving with this code present, as it can lead to further damage to the engine and emissions system. It is advisable to address the issue promptly.

6. How can I repair OBDII code P0057 on a 2018 Chevrolet Silverado?

- Repair options may include replacing the oxygen sensor on Bank 2 Sensor 2, repairing any damaged wiring or connectors, replacing a blown fuse, or addressing any PCM issues.

7. Is it safe to reset the Check Engine light after fixing OBDII code P0057 on a 2018 Chevrolet Silverado?

- Yes, once the issue causing the code has been successfully repaired, you can safely reset the Check Engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.

8. Can a DIY enthusiast without much experience fix OBDII code P0057 on a 2018 Chevrolet Silverado?

- While some aspects of diagnosing and repairing this code may be within reach of a DIY enthusiast, it is recommended to seek professional help, especially when dealing with electrical components and the PCM.

9. How much should I expect to pay for repairing OBDII code P0057 on a 2018 Chevrolet Silverado at a mechanic?

- Costs can vary based on the specific cause of the issue, but you can expect to pay anywhere from $150 to $400 for parts and labor, depending on the extent of the repair needed.

10. Will fixing OBDII code P0057 on a 2018 Chevrolet Silverado improve the vehicle's overall performance and fuel efficiency?

- Yes, addressing this code and restoring proper operation of the oxygen sensor can lead to improved engine performance, better fuel efficiency, and smoother idling of the vehicle.