C2223 Code - ECU Configuration Mismatch Drivetrain Control Module
Quick Answer
Continuously with system voltage between 10.0 and 16.0 volts, the Drivetrain Control Module (DTCM) detects an improper system configuration and sets the OBDII code. Common causes include Faulty Rear Driveline Module, Faulty Power Transfer Unit, Faulty Drivetrain Control Module (DTCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2223 indicates ECU Configuration Mismatch Drivetrain Control Module.
- Common causes
- Common causes include Faulty Rear Driveline Module, Faulty Power Transfer Unit, Faulty Drivetrain Control Module (DTCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2223 Description
What are the Possible Causes of the DTC C2223?
- Faulty Rear Driveline Module
- Faulty Power Transfer Unit
- Faulty Drivetrain Control Module (DTCM)
- Drivetrain Control Module (DTCM) harness is open or shorted
- Drivetrain Control Module (DTCM) circuit poor electrical connection
How to Fix the DTC C2223?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2223 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2223 code?
Need more information on how to fix the C2223 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2223 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C2223 Chrysler — ECU Configuration Mismatch Drivetrain Control Module
- C2223 Dodge — ECU Configuration Mismatch Drivetrain Control Module
- C2223 Jeep — ECU Configuration Mismatch Drivetrain Control Module
- C2223 RAM — ECU Configuration Mismatch Drivetrain Control Module
- C2223 Subaru — Transmitter 3 Pressure Data Abnormal
Frequently Asked Questions about C2223 Code
1. What does the OBDII code C2223 mean?
C2223 indicates an ECU configuration mismatch in the drivetrain control module, meaning the module's settings do not align with the vehicle’s specifications.
2. What are the common symptoms of a C2223 code?
Symptoms may include a check engine light, reduced engine performance, erratic transmission behavior, or the inability to start the vehicle.
3. What causes the C2223 code to appear?
This code is often caused by incorrect programming of the drivetrain control module, the installation of a mismatched ECU, or corruption in the configuration data.
4. Can a dead battery cause the C2223 code?
Yes, a dead or weak battery can disrupt ECU programming, potentially leading to configuration mismatches.
5. How is the C2223 code diagnosed?
A technician will typically use a diagnostic scanner to check the drivetrain control module’s configuration, verify compatibility, and compare it to the vehicle's specifications.
6. Can I drive my car with a C2223 code?
It’s not recommended, as the code can cause performance issues or prevent the vehicle from operating properly.
7. How is the C2223 code fixed?
The issue is usually resolved by reprogramming or re-flashing the drivetrain control module with the correct configuration using specialized tools.
8. Do I need to replace my drivetrain control module to fix C2223?
Not always. If the module itself isn’t defective, reprogramming or updating the software may resolve the issue without replacement.
9. Can a software update fix the C2223 code?
Yes, in some cases, updating the drivetrain control module’s software to the latest version can address the mismatch.
10. How much does it cost to repair the C2223 code?
The cost varies but typically ranges from $150 to $500, depending on whether reprogramming or module replacement is required and labor rates.
Discuss the causes and fixes for C2223 OBDII Code
Code C2223 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
