C1352 Code - Increasing Pressure Solenoid Malfunction Front Right
Quick Answer
Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the Skid Control Electronic Control Unit (ECU) and controls the vehicle. Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1352 indicates Increasing Pressure Solenoid Malfunction Front Right.
- Common causes
- Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1352 Description
What are the Possible Causes of the DTC C1352?
- Faulty Brake Actuator Assembly
- Faulty Skid Control Electronic Control Unit (ECU)
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
How to Fix the DTC C1352?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1352 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1352 code?
Need more information on how to fix the C1352 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1352 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1352 Hyundai — Right Front Low Frequency InitiatorI Open/Short Failure
- C1352 KIA — Right Front Low Frequency InitiatorI Open/Short Failure
- C1352 Lexus — Increasing Pressure Solenoid Malfunction Front Right
- C1352 Nissan — Increasing Pressure Solenoid Malfunction Front Right
- C1352 Toyota — Increasing Pressure Solenoid Malfunction Front Right
Frequently Asked Questions about C1352 Code
1. What are common symptoms of OBDII code C1352 (Increasing Pressure Solenoid Malfunction Front Right)?
The common symptoms include illuminated ABS warning light on the dashboard, decreased brake performance, and potential ABS system failure.
2. What can cause the OBDII code C1352 to trigger?
The code C1352 is typically triggered by a malfunction in the increasing pressure solenoid located on the front right side of the vehicle's ABS system.
3. How serious is the OBDII code C1352 (Increasing Pressure Solenoid Malfunction Front Right)?
Ignoring this code can lead to compromised ABS system functionality, which can affect the vehicle's braking performance and overall safety. It is recommended to address this issue promptly.
4. Are there any DIY repair tips for fixing the Increasing Pressure Solenoid Malfunction Front Right?
DIY repairs for this code may include checking the wiring connections to the solenoid, inspecting for any visible damage or corrosion, and replacing the solenoid if necessary. However, it's recommended to consult a professional mechanic for accurate diagnosis and repair.
5. Can driving with the OBDII code C1352 active cause further damage to the vehicle?
Continuing to drive with this code active can potentially worsen the ABS system's condition, leading to more severe brake-related issues. It is advisable to address the underlying problem promptly to avoid further damage.
6. How can I reset the OBDII code C1352 after making repairs?
After repairing the issue causing the code C1352, you can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes. However, it's essential to ensure that the underlying problem has been resolved to prevent the code from reappearing.
7. Is it safe to drive the vehicle with the ABS warning light illuminated due to code C1352?
Driving with the ABS warning light on can compromise the vehicle's braking system, especially in emergency situations or slippery road conditions. It is best to have the issue diagnosed and repaired before driving the vehicle.
8. How much does it typically cost to repair the Increasing Pressure Solenoid Malfunction Front Right?
The cost of repairing the increasing pressure solenoid can vary depending on the vehicle make and model, the extent of the damage, and the labor rates of the repair shop. It's advisable to obtain quotes from different mechanics for an accurate estimate.
9. Can a faulty wheel speed sensor cause the OBDII code C1352 to be triggered?
While a faulty wheel speed sensor can sometimes affect the ABS system, the code C1352 specifically points to a malfunction in the increasing pressure solenoid on the front right side. It's essential to diagnose the issue accurately to address the root cause.
10. Will the OBDII code C1352 (Increasing Pressure Solenoid Malfunction Front Right) affect the vehicle's overall drivability?
While the vehicle may still be driveable with this code present, the compromised ABS system can impact braking performance and safety. It's recommended to have the issue addressed promptly to ensure optimal drivability and safety.
Discuss the causes and fixes for C1352 OBDII Code
Code C1352 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
