C1162 Code - Incomplete Pressure Sensor Calibration
Quick Answer
The pressure sensor converts the brake fluid pressure to an electric signal and transmits it to the Anti-Lock Brake System (ABS) Actuator and Electric Unit (Control Unit). Common causes include Faulty ABS Actuator and Electric Unit, ABS Actuator and Electric Unit harness is open or shorted, ABS Actuator and Electric Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1162 indicates Incomplete Pressure Sensor Calibration.
- Common causes
- Common causes include Faulty ABS Actuator and Electric Unit, ABS Actuator and Electric Unit harness is open or shorted, ABS Actuator and Electric Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1162 Description
What are the Possible Causes of the DTC C1162?
- Faulty ABS Actuator and Electric Unit
- ABS Actuator and Electric Unit harness is open or shorted
- ABS Actuator and Electric Unit circuit poor electrical connection
How to Fix the DTC C1162?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1162 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1162 code?
Need more information on how to fix the C1162 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1162 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1162 Infiniti — Incomplete Pressure Sensor Calibration
- C1162 Nissan — Incomplete Pressure Sensor Calibration
Frequently Asked Questions about C1162 Code
1. What are the common symptoms of OBDII code C1162 (Incomplete Pressure Sensor Calibration)?
The common symptoms include illuminated Check Engine Light, poor vehicle performance, and potential issues with the braking system.
2. What can cause OBDII code C1162 to trigger?
This code is typically triggered by a failure in the pressure sensor calibration process, indicating a potential fault in the brake system's pressure sensor.
3. How serious is OBDII code C1162?
While the code itself may not directly affect the vehicle's drivability, it is essential to address it promptly to ensure the proper functioning of the brake system.
4. Can I continue driving with OBDII code C1162?
It is not recommended to continue driving with this code present, as it may lead to potential brake system issues and compromise overall safety.
5. How can I repair OBDII code C1162?
To repair this code, it is essential to diagnose the pressure sensor calibration process, check for any faults in the brake system, and recalibrate the pressure sensor if necessary.
6. Can I reset OBDII code C1162 without addressing the underlying issue?
Resetting the code without addressing the underlying issue will likely result in the code reappearing once the system detects the problem again.
7. Is it possible to perform the pressure sensor calibration at home?
Performing the pressure sensor calibration may require specialized tools and knowledge, making it advisable to seek professional help for proper calibration.
8. Are there any DIY tips for troubleshooting OBDII code C1162?
While basic checks like ensuring proper brake fluid levels can be done, diagnosing and repairing this code may require advanced knowledge and equipment.
9. How much does it cost to fix OBDII code C1162?
The cost of fixing this code can vary depending on the underlying issue, parts needed for repair, and labor costs. It is recommended to consult a mechanic for an accurate estimate.
10. Can OBDII code C1162 affect other systems in the vehicle?
While this code primarily relates to the brake system's pressure sensor, unresolved issues could potentially impact other systems that rely on accurate brake pressure data.
Discuss the causes and fixes for C1162 OBDII Code
Code C1162 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
