AutoCodes – Generic – C0875

C0875 Code - Yaw Rate Sensor

Quick Answer

The Electronic Brake Control Module (EBCM) monitors the Yaw Rate Sensor reference voltage for an over or under voltage condition. Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0875 indicates Yaw Rate Sensor.
Common causes: Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,269

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 02, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0875 Description

The Electronic Brake Control Module (EBCM) monitors the Yaw Rate Sensor reference voltage for an over or under voltage condition. The EBCM sets the OBDII code when the Yaw Rate Sensor is not to factory specifications.

OBDII Code C0875 - Yaw Rate Sensor - AutoCodes.com — C0875 Code - Yaw Rate Sensor

What does this mean?

What are the Possible Causes of the DTC C0875?

Faulty Yaw Rate Sensor
Yaw Rate Sensor harness is open or shorted
Yaw Rate Sensor circuit poor electrical connection

How to Fix the DTC C0875?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0875 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0875 code?

Need more information on how to fix the C0875 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0875 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C0875 Buick — Yaw Rate Sensor
C0875 Cadillac — Yaw Rate Sensor
C0875 Chevrolet — Yaw Rate Sensor
C0875 GMC — Yaw Rate Sensor
C0875 Pontiac — Yaw Rate Sensor
C0875 Saturn — Yaw Rate Sensor

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0875 Code

1. What are common symptoms of a Yaw Rate Sensor issue (OBDII code C0875)?

- Common symptoms include the traction control or stability control warning light illuminating on the dashboard, erratic steering behavior, and potential loss of stability while driving.

2. What causes the Yaw Rate Sensor fault (OBDII code C0875)?

- The fault code C0875 for the Yaw Rate Sensor is typically triggered by a malfunction within the sensor itself or issues with the sensor's wiring or connections.

3. How serious is a Yaw Rate Sensor fault (OBDII code C0875)?

- A Yaw Rate Sensor fault can impact the vehicle's stability control system, which may compromise the handling and safety of the vehicle. It is important to address this issue promptly.

4. Can I still drive my vehicle with a Yaw Rate Sensor fault (OBDII code C0875)?

- It is not recommended to drive the vehicle with a Yaw Rate Sensor fault, as it can affect the vehicle's stability and handling. It is advisable to have the issue diagnosed and repaired before driving the vehicle.

5. How can I diagnose a Yaw Rate Sensor fault (OBDII code C0875)?

- Diagnosing a Yaw Rate Sensor fault often requires specialized diagnostic equipment to read the fault code and test the sensor's functionality. It is recommended to consult a professional mechanic for an accurate diagnosis.

6. What are some possible repair options for a Yaw Rate Sensor fault (OBDII code C0875)?

- Repair options may include replacing the Yaw Rate Sensor, repairing damaged wiring or connections, or recalibrating the sensor as per manufacturer's specifications.

7. Can a DIY enthusiast fix a Yaw Rate Sensor fault (OBDII code C0875)?

- Repairing a Yaw Rate Sensor fault may require specialized knowledge and tools, so it is usually best left to professional mechanics with experience in handling electronic components and vehicle stability systems.

8. How much does it cost to repair a Yaw Rate Sensor fault (OBDII code C0875)?

- The cost of repairing a Yaw Rate Sensor fault can vary depending on the extent of the issue, the specific vehicle make and model, and labor rates in your area. It is advisable to obtain quotes from different mechanics for an accurate estimate.

9. Can a Yaw Rate Sensor fault (OBDII code C0875) be prevented?

- While some faults may occur due to normal wear and tear, maintaining your vehicle according to the manufacturer's recommended service schedule can help prevent issues with the Yaw Rate Sensor and other components of the stability control system.

10. How long does it take to repair a Yaw Rate Sensor fault (OBDII code C0875)?

- The repair time for a Yaw Rate Sensor fault can vary depending on the exact cause of the issue, the availability of parts, and the mechanic's expertise. It is best to consult with your mechanic for an estimate of the repair timeline.