AutoCodesBuick – C0875 Buick

C0875 Buick Code - Yaw Rate Sensor

Quick Answer

The Electronic Brake Control Module (EBCM) monitors the Yaw Rate Sensor reference voltage for an over or under voltage condition. Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0875 Buick indicates Yaw Rate Sensor.
Common causes
Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 755
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 02, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0875 Buick Description

The Electronic Brake Control Module (EBCM) monitors the Yaw Rate Sensor reference voltage for an over or under voltage condition. The EBCM sets the OBDII code when the Yaw Rate Sensor is not to factory specifications.
OBDII Code C0875 Buick - Yaw Rate Sensor - AutoCodes.com
C0875 Buick Code - Yaw Rate Sensor

What are the Possible Causes of the DTC C0875 Buick?

  • Faulty Yaw Rate Sensor
  • Yaw Rate Sensor harness is open or shorted
  • Yaw Rate Sensor circuit poor electrical connection

How to Fix the DTC C0875 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0875 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0875 Buick code?

Need more information on how to fix the C0875 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0875 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0875 Buick Code

1. What does the OBDII code C0875 mean on a Buick?

C0875 indicates an issue with the Yaw Rate Sensor, which is responsible for detecting the vehicle's rotational movement and stability.

2. What are common symptoms of code C0875 on a Buick?

Common symptoms include the ABS or stability control warning light turning on, reduced traction control performance, or erratic handling during cornering.

3. What causes the C0875 code to appear?

Frequent causes include a faulty yaw rate sensor, damaged wiring or connectors, poor sensor calibration, or a malfunctioning control module.

4. Can I drive my Buick with the C0875 code active?

While the vehicle may still be drivable, safety systems like stability control and traction control may not function properly, increasing the risk in certain driving conditions.

5. How do I diagnose a C0875 code on my Buick?

Start by checking the Yaw Rate Sensor and its wiring for damage or corrosion. Use a diagnostic scanner to confirm the fault and check for related codes.

6. How do I fix the C0875 code on a Buick?

Repairs may include replacing the yaw rate sensor, repairing damaged wiring or connectors, or recalibrating the sensor using a diagnostic tool.

7. Where is the yaw rate sensor located in my Buick?

The yaw rate sensor is typically located under the center console, near the floor, or in the vehicle's electronics control module area.

8. How much does it cost to fix a C0875 code on a Buick?

Repair costs can vary but may range from $150 to $500, depending on whether the sensor, wiring, or calibration needs attention.

9. Can a dead battery cause the C0875 code?

Yes, a dead or weak battery can disrupt the sensor’s calibration and trigger the C0875 code.

10. Do I need to recalibrate the yaw rate sensor after replacing it?

Yes, most yaw rate sensors require recalibration using a compatible diagnostic tool to ensure proper functionality.

Discuss the causes and fixes for C0875 Buick OBDII Code

Code C0875 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play