C0696 Code - Suspension Position Sensor 5V Supply
Quick Answer
The Suspension Control Module provides a common regulated reference voltage of approximately 5 V to all of the Suspension Position Sensors. Common causes include Faulty Suspension Position Sensor (Sensor that sets the code), Suspension Position Sensor harness is open or shorted, Suspension Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0696 indicates Suspension Position Sensor 5V Supply.
- Common causes
- Common causes include Faulty Suspension Position Sensor (Sensor that sets the code), Suspension Position Sensor harness is open or shorted, Suspension Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0696 Description
What are the Possible Causes of the DTC C0696?
- Faulty Suspension Position Sensor (Sensor that sets the code)
- Suspension Position Sensor harness is open or shorted
- Suspension Position Sensor circuit poor electrical connection
- Faulty Suspension Control Module
How to Fix the DTC C0696?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0696 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0696 code?
Need more information on how to fix the C0696 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0696 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C0696 Buick — Suspension Position Sensor 5V Supply
- C0696 Cadillac — Suspension Position Sensor 5V Supply
- C0696 Chevrolet — Suspension Position Sensor 5V Supply
- C0696 GMC — Suspension Position Sensor 5V Supply
Frequently Asked Questions about C0696 Code
1. What are the common symptoms of OBDII code C0696 related to the Suspension Position Sensor 5V Supply?
- Common symptoms include stability control issues, inaccurate suspension height readings, and illuminated warning lights on the dashboard.
2. What could cause OBDII code C0696 to appear in relation to the Suspension Position Sensor 5V Supply?
- The code may indicate a malfunction in the suspension position sensor circuit, a faulty sensor, wiring issues, or a problem with the sensor's power supply.
3. How can I diagnose the cause of OBDII code C0696 for the Suspension Position Sensor 5V Supply?
- Diagnosis typically involves checking the sensor's wiring for damage, testing the sensor's resistance, and verifying proper voltage supply to the sensor.
4. Can I drive my vehicle with OBDII code C0696 related to the Suspension Position Sensor 5V Supply?
- It is not recommended to drive the vehicle with this code present, as it can affect the stability and performance of the suspension system.
5. What are some repair tips for fixing OBDII code C0696 associated with the Suspension Position Sensor 5V Supply?
- Repair tips may include checking and repairing any damaged wiring, replacing the faulty suspension position sensor, or addressing issues with the sensor's power supply.
6. Is it possible to reset OBDII code C0696 for the Suspension Position Sensor 5V Supply without repairs?
- While clearing the code may temporarily turn off the warning light, it is important to address the underlying issue to prevent further problems with the suspension system.
7. How much does it typically cost to repair OBDII code C0696 related to the Suspension Position Sensor 5V Supply?
- Repair costs can vary depending on the specific cause of the issue, but they may range from a few hundred to a few thousand dollars, including parts and labor.
8. Will OBDII code C0696 for the Suspension Position Sensor 5V Supply affect the vehicle's safety?
- Yes, this code can affect the vehicle's safety by compromising the suspension system's performance and stability control functions.
9. Can a DIY enthusiast repair OBDII code C0696 associated with the Suspension Position Sensor 5V Supply?
- While some DIY enthusiasts may be able to diagnose and address simple wiring issues, repairing or replacing the suspension position sensor may require professional expertise.
10. How often does OBDII code C0696 related to the Suspension Position Sensor 5V Supply occur in vehicles?
- The occurrence of this code can vary depending on the vehicle's make and model, driving conditions, and maintenance history, but it is not an uncommon issue in vehicles with advanced suspension systems.
Discuss the causes and fixes for C0696 OBDII Code
Code C0696 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
