C0460 Code - Steering Position Sensor Invalid Data
Quick Answer
The steering angle sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0460 indicates Steering Position Sensor Invalid Data.
- Common causes
- Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0460 Description
What are the Possible Causes of the DTC C0460?
- Faulty Steering Wheel Angle Sensor
- Steering Wheel Angle Sensor harness is open or shorted
- Steering Wheel Angle Sensor circuit poor electrical connection
How to Fix the DTC C0460?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
- C0460 39: Steering Position Sensor Circuit Internal Electronic Failure
- C0460 42: Steering Position Signal Initialisation Not Accomplished
- C0460 4B: Steering Position Signal Calibration Not Accomplished
- C0460 5A: Steering Position Sensor Not Plausible -- Steering Angle Sensor Offset Fault
- C0460 71: Steering Position Sensor Invalid Serial Data Received
- C0460 72: Steering Position Sensor Circuit Malfunction Rolling Count Invalid
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0460 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0460 code?
Need more information on how to fix the C0460 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0460 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C0460 Buick — Steering Position Sensor Invalid Data
- C0460 Cadillac — Steering Position Sensor Invalid Data
- C0460 Chevrolet — Steering Position Sensor Invalid Data
- C0460 GMC — Steering Position Sensor Invalid Data
Frequently Asked Questions about C0460 Code
1. What does the OBDII code C0460 mean?
C0460 indicates that the vehicle's steering position sensor is sending invalid or inconsistent data to the power steering control module or other related systems.
2. What are the common symptoms of code C0460?
Common symptoms include the steering assist not functioning properly, the steering wheel feeling heavy, illuminated warning lights (like the Service Steering System or Check Engine light), and erratic power steering behavior.
3. What causes the C0460 code to appear?
The code can be caused by a faulty steering position sensor, damaged wiring or connectors, incorrect steering angle calibration, or issues with the power steering control module.
4. Can I drive with the C0460 code active?
While the vehicle may still be drivable, a malfunctioning steering position sensor can impair steering performance and increase the risk of accidents. It is advised to address the issue promptly.
5. How do I diagnose the C0460 code?
Diagnosis involves scanning for codes using an OBDII scanner, inspecting the steering position sensor and its wiring, and checking for other related codes that may provide additional context.
6. How do I fix the C0460 code?
Repairs may include replacing the steering position sensor, repairing or replacing damaged wiring or connectors, recalibrating the steering angle sensor, or updating/reprogramming the control module.
7. Does the steering position sensor need recalibration after replacement?
Yes, after replacing the steering position sensor, it typically needs to be recalibrated using a diagnostic tool to ensure proper functionality.
8. What tools are needed to fix the C0460 code?
You will need an OBDII scanner, a multimeter for testing wiring, and potentially a specialized diagnostic tool for steering angle sensor recalibration.
9. How much does it cost to fix the C0460 code?
Costs vary depending on the issue, but replacing a steering position sensor typically costs between $200 and $500, including parts and labor.
10. Can low power steering fluid cause the C0460 code?
No, low power steering fluid does not directly cause this code, as it pertains to the steering position sensor’s data, not hydraulic issues.
Discuss the causes and fixes for C0460 OBDII Code
Code C0460 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
