B2624 Code - Display Dimming Signal Circuit
Quick Answer
The Body Control Module (BCM) directly sends a reference voltage to the Instrument Panel (I/P) Dimmer Switch which is then reduced based on the I/P Dimmer Switch position and monitored as a signal to the BCM. Common causes include Faulty Headlamp and Panel Dimmer Switch, Headlamp and Panel Dimmer Switch harness is open or shorted, Headlamp and Panel Dimmer Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2624 indicates Display Dimming Signal Circuit.
- Common causes
- Common causes include Faulty Headlamp and Panel Dimmer Switch, Headlamp and Panel Dimmer Switch harness is open or shorted, Headlamp and Panel Dimmer Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2624 Description
What are the Possible Causes of the DTC B2624?
- Faulty Headlamp and Panel Dimmer Switch
- Headlamp and Panel Dimmer Switch harness is open or shorted
- Headlamp and Panel Dimmer Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2624?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2624 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2624 code?
Need more information on how to fix the B2624 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2624 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B2624 Buick — Display Dimming Signal Circuit
- B2624 Cadillac — Display Dimming Signal Circuit
- B2624 Chevrolet — Display Dimming Signal Circuit
- B2624 GMC — Display Dimming Signal Circuit
- B2624 Lexus — Vehicles Speed Malfunction
- B2624 Toyota — Vehicles Speed Malfunction
Frequently Asked Questions about B2624 Code
1. What are the common symptoms of OBDII code B2624?
- Common symptoms include dim or flickering dashboard display, difficulty reading information on the display, and intermittent loss of display illumination.
2. What can cause the OBDII code B2624 to trigger?
- The code B2624 is typically triggered by issues with the display dimming signal circuit, such as a faulty dimmer switch, damaged wiring, or a malfunctioning display module.
3. How can I diagnose the OBDII code B2624?
- To diagnose the code B2624, you can use a multimeter to test the voltage at various points along the display dimming signal circuit, check the dimmer switch for proper operation, and inspect the wiring for any signs of damage or corrosion.
4. What are some repair tips for addressing OBDII code B2624?
- Repair tips for code B2624 may include replacing the dimmer switch, repairing or replacing damaged wiring, checking and resetting the display module, and ensuring proper connections throughout the display dimming signal circuit.
5. Can I drive my vehicle with the OBDII code B2624 active?
- It is generally safe to drive your vehicle with the code B2624, but it is recommended to address the issue promptly to prevent any potential safety hazards or further electrical problems.
6. How much does it typically cost to repair OBDII code B2624?
- The cost of repairing code B2624 can vary depending on the specific cause of the issue and the labor rates in your area. In general, the cost may range from $100 to $300 for parts and labor.
7. Is OBDII code B2624 a serious problem that requires immediate attention?
- While code B2624 may not cause immediate drivability issues, it is important to address the problem to ensure proper functionality of the dashboard display and to prevent potential electrical issues in the future.
8. Can I reset the OBDII code B2624 on my own?
- Yes, you can reset the code B2624 using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, it is recommended to diagnose and repair the underlying issue to prevent the code from reoccurring.
9. Are there any common mistakes to avoid when dealing with OBDII code B2624?
- Common mistakes to avoid include neglecting to check the dimmer switch, overlooking wiring inspections, and ignoring intermittent display issues that could be early signs of a larger problem.
10. How can I prevent OBDII code B2624 from coming back in the future?
- To prevent the code B2624 from reoccurring, it is important to address any underlying issues promptly, perform regular maintenance checks on the display dimming signal circuit, and avoid overloading the electrical system with aftermarket accessories.
Discuss the causes and fixes for B2624 OBDII Code
Code B2624 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
