B2624 Buick Code - Display Dimming Signal Circuit
Quick Answer
The Body Control Module (BCM) directly sends a reference voltage to the Instrument Panel (I/P) Dimmer Switch which is then reduced based on the I/P Dimmer Switch position and monitored as a signal to the BCM. Common causes include Faulty Headlamp and Panel Dimmer Switch, Headlamp and Panel Dimmer Switch harness is open or shorted, Headlamp and Panel Dimmer Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2624 Buick indicates Display Dimming Signal Circuit.
- Common causes
- Common causes include Faulty Headlamp and Panel Dimmer Switch, Headlamp and Panel Dimmer Switch harness is open or shorted, Headlamp and Panel Dimmer Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2624 Buick Description
What are the Possible Causes of the DTC B2624 Buick?
- Faulty Headlamp and Panel Dimmer Switch
- Headlamp and Panel Dimmer Switch harness is open or shorted
- Headlamp and Panel Dimmer Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2624 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2624 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2624 Buick code?
Need more information on how to fix the B2624 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2624 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2624 Buick Code
1. What does OBDII code B2624 mean for a Buick?
Code B2624 indicates an issue with the Display Dimming Signal Circuit, which controls the dimming function of the vehicle's interior display and instrument panel.
2. What are the common symptoms of code B2624 in a Buick?
Symptoms may include the instrument panel or display screens not dimming as expected, staying at full brightness, or failing to illuminate properly.
3. What causes code B2624 to appear in a Buick?
The code can be triggered by a faulty dimmer switch, damaged wiring or connectors in the display dimming circuit, or a malfunctioning Body Control Module (BCM).
4. How can I diagnose the B2624 code in my Buick?
Start by inspecting the dimmer switch, circuit wiring, and connectors for damage or loose connections. Use a multimeter to check for proper voltage and continuity in the circuit.
5. Can a blown fuse cause the B2624 code?
Yes, a blown fuse in the display dimming circuit can result in the B2624 code. Check the fuse box and replace any blown fuses related to the dimming circuit.
6. Is it safe to drive with the B2624 code active?
Yes, it is generally safe to drive, but the inability to adjust display brightness may be distracting or uncomfortable, especially at night.
7. How do I fix the B2624 code on my Buick?
Repairs may involve replacing a faulty dimmer switch, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the BCM if it is defective.
8. Can a software issue in the BCM cause the B2624 code?
Yes, software glitches in the Body Control Module can sometimes trigger the B2624 code. Updating or reprogramming the BCM may resolve the issue.
9. How much does it cost to repair code B2624 on a Buick?
Repair costs vary depending on the cause, but replacing a dimmer switch typically costs $50-$150, while BCM repairs or replacements can range from $300 to $800.
10. Can I reset the B2624 code without fixing the problem?
While you can clear the code with an OBDII scanner, it will likely return unless the underlying issue with the dimming circuit is resolved.
Discuss the causes and fixes for B2624 Buick OBDII Code
Code B2624 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
