B2313 Code - Glass Position Initialization Incomplete
Quick Answer
The Front Power Window Regulator Motor Assembly Left (LH) is operated by the power window regulator master switch assembly. Common causes include Faulty Front Power Window Regulator Motor Assembly Left (LH), Front Power Window Regulator Motor Assembly Left harness is open or shorted, Front Power Window Regulator Motor Assembly Left circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2313 indicates Glass Position Initialization Incomplete.
- Common causes
- Common causes include Faulty Front Power Window Regulator Motor Assembly Left (LH), Front Power Window Regulator Motor Assembly Left harness is open or shorted, Front Power Window Regulator Motor Assembly Left circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2313 Description
When the ECU determines that the Front Power Window Regulator Motor Assembly Left (LH) has not been initialized, Diagnostic Trouble Code (DTC) B2313 is stored.
What are the Possible Causes of the DTC B2313?
- Faulty Front Power Window Regulator Motor Assembly Left (LH)
- Front Power Window Regulator Motor Assembly Left harness is open or shorted
- Front Power Window Regulator Motor Assembly Left circuit poor electrical connection
How to Fix the DTC B2313?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2313 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2313 code?
Need more information on how to fix the B2313 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2313 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B2313 Chrysler — Wiper On/Off Control Circuit
- B2313 Dodge — Wiper On/Off Control Circuit
- B2313 Jeep — Wiper On/Off Control Circuit
- B2313 Lexus — Glass Position Initialization Incomplete
- B2313 RAM — Wiper On/Off Control Circuit
- B2313 Scion — Glass Position Initialization Incomplete
- B2313 Toyota — Glass Position Initialization Incomplete
Frequently Asked Questions about B2313 Code
1. What are the common symptoms of OBDII code B2313 (Glass Position Initialization Incomplete)?
- Common symptoms include power window malfunction, erratic window movement, and possible automatic window roll-up feature not working properly.
2. What are the possible causes of OBDII code B2313?
- The code B2313 may be caused by a faulty power window motor, a malfunctioning window regulator, damaged window glass, or issues with the window control module.
3. How can I diagnose the issue related to OBDII code B2313?
- To diagnose the issue, you can start by checking the power window switches, inspecting the window regulator for any damage, testing the power window motor, and scanning the window control module for error codes.
4. Can I still drive my vehicle with OBDII code B2313?
- It is generally safe to drive your vehicle with the B2313 code, but it is recommended to address the issue promptly to avoid potential inconvenience and safety hazards associated with malfunctioning power windows.
5. How can I reset OBDII code B2313?
- Resetting the B2313 code can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, it is crucial to address the underlying issue causing the code before resetting it.
6. Are there any DIY repair tips for fixing OBDII code B2313?
- DIY repair tips include checking the power window fuse, lubricating the window tracks, adjusting the window regulator, and ensuring proper alignment of the window glass within the door.
7. Should I replace the power window motor if OBDII code B2313 is triggered?
- Replacing the power window motor may be necessary if it is found to be faulty during the diagnostic process. However, it is recommended to consult a professional technician for an accurate diagnosis and repair.
8. Can extreme weather conditions trigger OBDII code B2313?
- Yes, extreme weather conditions such as extreme cold or heat can potentially affect the performance of power windows and trigger the B2313 code. It is essential to keep the windows well-maintained to prevent such issues.
9. Is OBDII code B2313 a serious issue that requires immediate attention?
- While OBDII code B2313 may not pose an immediate safety risk, it can lead to inconvenience and discomfort if left unaddressed. It is advisable to address the underlying problem as soon as possible to ensure proper functionality of the power windows.
10. Can a faulty window control module cause OBDII code B2313?
- Yes, a faulty window control module can cause the B2313 code to appear. If other components related to the power windows are in good condition, it is recommended to inspect the control module for potential issues and consider replacing it if necessary.
Discuss the causes and fixes for B2313 OBDII Code
Code B2313 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
