AutoCodes – RAM – B2313 RAM

B2313 RAM Code - Wiper On/Off Control Circuit

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2313 RAM indicates Wiper On/Off Control Circuit.
Common causes: Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,101

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 07, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2313 RAM Description

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a low condition in the wiper low speed control output circuit.

OBDII Code B2313 RAM - Wiper On/Off Control Circuit - AutoCodes.com — B2313 RAM Code - Wiper On/Off Control Circuit

What does this mean?

What are the Possible Causes of the DTC B2313 RAM?

Faulty Wiper Motor
Wiper Motor harness is open or shorted
Wiper Motor circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2313 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2313 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2313 RAM code?

Need more information on how to fix the B2313 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2313 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2313 RAM Code

1. What are the common symptoms of OBDII code B2313 RAM related to the Wiper On/Off Control Circuit?

- Common symptoms include erratic wiper operation, wipers not turning on or off properly, or total failure of the wiper system.

2. What are the possible causes of OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- Possible causes include a faulty wiper switch, damaged wiring or connectors in the wiper circuit, or a malfunctioning wiper control module.

3. How can I diagnose OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- You can diagnose this code by checking the wiper switch for proper functionality, inspecting the wiring for any visible damage, and using a diagnostic tool to test the wiper control module.

4. Can a blown fuse cause OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- Yes, a blown fuse in the wiper circuit can also trigger this OBDII code, so it's important to check and replace any blown fuses as needed.

5. What are some repair tips for fixing OBDII code B2313 RAM related to the Wiper On/Off Control Circuit?

- Repair tips include checking and repairing any damaged wiring, replacing a faulty wiper switch or control module, and ensuring all connections are secure and free of corrosion.

6. Is it safe to continue driving with OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- It is not recommended to continue driving with this code as it can lead to unpredictable wiper behavior, compromising visibility and safety while driving.

7. How much does it typically cost to repair OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- The cost of repair can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Can I reset OBDII code B2313 RAM for the Wiper On/Off Control Circuit myself?

- Yes, you can reset the code using an OBDII scanner, but it's important to first identify and address the underlying issue causing the code before clearing it.

9. Are there any preventive measures to avoid OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- Regularly checking the wiper system for proper operation, addressing any issues promptly, and keeping the wiper components clean can help prevent this code from occurring.

10. Can extreme weather conditions contribute to triggering OBDII code B2313 RAM for the Wiper On/Off Control Circuit?

- Yes, extreme weather conditions like heavy rain, snow, or ice can put additional strain on the wiper system, potentially leading to issues that trigger this OBDII code.