B2239 Code - Rear Cargo Door Set Switch Stuck Short To Ground
Quick Answer
The Body Control Module (BCM) monitors the Rear Cargo Door Set Switch. Common causes include Faulty Rear Cargo Door Set Switch, Rear Cargo Door Set Switch harness is open or shorted, Rear Cargo Door Set Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2239 indicates Rear Cargo Door Set Switch Stuck Short To Ground.
- Common causes
- Common causes include Faulty Rear Cargo Door Set Switch, Rear Cargo Door Set Switch harness is open or shorted, Rear Cargo Door Set Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2239 Description
What are the Possible Causes of the DTC B2239?
- Faulty Rear Cargo Door Set Switch
- Rear Cargo Door Set Switch harness is open or shorted
- Rear Cargo Door Set Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2239?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2239 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2239 code?
Need more information on how to fix the B2239 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2239 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B2239 Buick — Right Door Un-Lock Switch Fault
- B2239 Cadillac — Right Door Un-Lock Switch Fault
- B2239 Chevrolet — Right Door Un-Lock Switch Fault
- B2239 Chrysler — HID Leveling Translator ECU Internal
- B2239 Dodge — HID Leveling Translator ECU Internal
- B2239 GMC — Right Door Un-Lock Switch Fault
- B2239 Jeep — HID Leveling Translator ECU Internal
- B2239 Lexus — Rear Right Center Sensor Malfunction
- B2239 RAM — HID Leveling Translator ECU Internal
- B2239 Toyota — Rear Right Center Sensor Malfunction
Frequently Asked Questions about B2239 Code
1. What does OBDII code B2239 mean?
Code B2239 indicates that the rear cargo door set switch is stuck or shorted to ground, preventing proper electrical communication.
2. What are the common symptoms of code B2239?
Symptoms include the rear cargo door not opening or closing properly, warning lights on the dashboard, or difficulty locking and unlocking the rear cargo door.
3. What causes the rear cargo door set switch to get stuck or short to ground?
Common causes include damaged wiring, corrosion in the switch or connectors, a faulty cargo door set switch, or physical obstructions in the mechanism.
4. How do you diagnose code B2239?
Start by inspecting the rear cargo door switch and wiring for damage or corrosion. Use a multimeter to test for shorts or continuity issues in the circuit.
5. Can a faulty rear cargo door set switch trigger code B2239?
Yes, a malfunctioning switch can cause this code by either sticking or sending incorrect signals to the control module.
6. Is it safe to drive with code B2239 active?
While it may not directly affect drivability, the code can interfere with cargo door operation and vehicle security, so it’s best to address it promptly.
7. How can I fix code B2239?
Repairs may include replacing the rear cargo door set switch, repairing damaged wiring, cleaning corroded connections, or removing obstructions.
8. Can extreme weather cause B2239 to appear?
Yes, exposure to moisture or freezing temperatures can lead to corrosion or mechanical issues in the rear cargo door switch.
9. Will clearing the code with a scan tool fix the problem?
Clearing the code will remove it temporarily, but the root cause must be addressed to prevent the issue from recurring.
10. What tools are needed to repair code B2239?
Common tools include a multimeter for electrical testing, a scan tool for diagnostics, and basic hand tools for accessing and replacing components.
Discuss the causes and fixes for B2239 OBDII Code
Code B2239 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
