AutoCodes – Generic – B2208

B2208 Code - Occupant Restraint Controller Internal 2

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2208 indicates Occupant Restraint Controller Internal 2.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 16,565

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2208 Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.

OBDII Code B2208 - Occupant Restraint Controller Internal 2 - AutoCodes.com — B2208 Code - Occupant Restraint Controller Internal 2

What does this mean?

What are the Possible Causes of the DTC B2208?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B2208?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2208 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2208 code?

Need more information on how to fix the B2208 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2208 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B2208 Buick — Right Window Down Switch Fault
B2208 Cadillac — Right Window Down Switch Fault
B2208 Chevrolet — Right Window Down Switch Fault
B2208 Chrysler — Occupant Restraint Controller Internal 2
B2208 Dodge — Occupant Restraint Controller Internal 2
B2208 GMC — Right Window Down Switch Fault
B2208 Jeep — Occupant Restraint Controller Internal 2
B2208 RAM — Occupant Restraint Controller Internal 2

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2208 Code

1. What are the common symptoms of OBDII code B2208?

The common symptoms of OBDII code B2208 include illuminated airbag warning light on the dashboard, non-functioning airbags, and potential issues with the seat belt restraints.

2. What are the possible causes of OBDII code B2208?

The possible causes of OBDII code B2208 include a faulty occupant restraint controller, damaged wiring or connectors in the airbag system, or an internal fault in the airbag control module.

3. How can I diagnose the OBDII code B2208?

Diagnosing OBDII code B2208 involves using a compatible OBDII scanner to retrieve the code and then performing a thorough inspection of the occupant restraint system, including checking the wiring, connectors, and controller for any faults.

4. Can I still drive my vehicle with OBDII code B2208?

It is not recommended to drive your vehicle with OBDII code B2208, as it indicates a potential issue with the airbag system, which is crucial for occupant safety in the event of a collision.

5. How can I repair OBDII code B2208?

Repairing OBDII code B2208 may involve replacing the occupant restraint controller, repairing or replacing damaged wiring or connectors, or resetting the airbag system after addressing any underlying issues.

6. Is it safe to reset the OBDII code B2208 without fixing the underlying problem?

Resetting the OBDII code B2208 without fixing the underlying problem is not recommended, as the issue with the airbag system may persist and compromise occupant safety in the event of an accident.

7. Can a DIY enthusiast fix OBDII code B2208 at home?

While some aspects of diagnosing and repairing OBDII code B2208 may be possible for DIY enthusiasts with the necessary tools and knowledge, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair.

8. How much does it cost to repair OBDII code B2208?

The cost of repairing OBDII code B2208 can vary depending on the underlying issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from different mechanics or repair shops for an accurate estimate.

9. How long does it take to repair OBDII code B2208?

The time required to repair OBDII code B2208 can vary based on the complexity of the issue, availability of parts, and the skill level of the mechanic. It is best to consult with a professional for a more accurate timeframe.

10. Can OBDII code B2208 affect the vehicle's overall performance?

While OBDII code B2208 is related to the airbag system and occupant safety, it may not directly impact the vehicle's overall performance. However, it is essential to address this code promptly to ensure the proper functioning of the airbag system.