AutoCodes – Generic – B1995

B1995 Code - Driver Side Side Mount Airbag Low Resistance On Squib

Quick Answer

The Restraints Control Module (RCM) monitors the Driver Side Side Mount Airbag. Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1995 indicates Driver Side Side Mount Airbag Low Resistance On Squib.
Common causes: Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,638

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1995 Description

The Restraints Control Module (RCM) monitors the Driver Side Side Mount Airbag. The RCM sets the OBDII code when the Driver Side Side Mount Airbag is not to factory specifications.

OBDII Code B1995 - Driver Side Side Mount Airbag Low Resistance On Squib - AutoCodes.com — B1995 Code - Driver Side Side Mount Airbag Low Resistance On Squib

What does this mean?

What are the Possible Causes of the DTC B1995?

Faulty Driver Side Side Mount Airbag
Driver Side Side Mount Airbag harness is open or shorted
Driver Side Side Mount Airbag circuit poor electrical connection
Faulty Restraints Control Module (RCM)

How to Fix the DTC B1995?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1995 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1995 code?

Need more information on how to fix the B1995 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1995 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1995 Ford — Driver Side Side Mount Airbag Low Resistance On Squib
B1995 Lincoln — Driver Side Side Mount Airbag Low Resistance On Squib
B1995 Mercury — Driver Side Side Mount Airbag Low Resistance On Squib

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1995 Code

1. What are the common symptoms of OBDII code B1995?

The common symptoms of OBDII code B1995 include the airbag warning light illuminating on the dashboard, as well as potential issues with the driver side side mount airbag system.

2. What are the possible causes of OBDII code B1995?

The possible causes of OBDII code B1995 include a low resistance on the squib circuit of the driver side side mount airbag, faulty wiring connections, or a defective airbag squib.

3. How can I diagnose OBDII code B1995?

Diagnosing OBDII code B1995 involves using a professional OBDII scanner to retrieve the specific fault code, inspecting the wiring harness and connections related to the driver side side mount airbag system, and testing the airbag squib for proper resistance.

4. Can I drive my vehicle with OBDII code B1995 present?

It is not recommended to drive your vehicle with OBDII code B1995 present, as it indicates a potential issue with the driver side side mount airbag system, which can compromise your safety in the event of a collision.

5. How can I repair OBDII code B1995?

To repair OBDII code B1995, you may need to replace the driver side side mount airbag squib, repair any damaged wiring connections, or reset the airbag system using a professional OBDII scanner after addressing the underlying cause.

6. Is it safe to reset the OBDII code B1995 without fixing the issue?

Resetting OBDII code B1995 without fixing the underlying issue with the driver side side mount airbag system is not recommended, as it can pose a risk to your safety in the event of a collision.

7. Can a DIY enthusiast fix OBDII code B1995 at home?

While some DIY enthusiasts may have the skills to diagnose and repair OBDII code B1995 at home, it is recommended to seek professional assistance due to the critical nature of the airbag system and safety concerns.

8. How much does it cost to repair OBDII code B1995 at a mechanic?

The cost to repair OBDII code B1995 at a mechanic can vary depending on the specific cause of the issue, the cost of parts needed for repair, and the labor rates of the service provider. It is advisable to obtain a quote from a trusted mechanic.

9. Will OBDII code B1995 cause my airbags to deploy unexpectedly?

OBDII code B1995 itself will not cause the airbags to deploy unexpectedly. However, it indicates a fault in the driver side side mount airbag system, which may affect the proper deployment of the airbags in a collision.

10. How often should I have the airbag system checked to prevent OBDII code B1995?

It is recommended to have your airbag system checked during regular maintenance intervals or if you experience any symptoms indicating a potential issue. Preventative maintenance can help detect and address problems before they trigger OBDII code B1995.