B1995 Ford Code - Driver Side Side Mount Airbag Low Resistance On Squib
Quick Answer
The Restraints Control Module (RCM) monitors the Driver Side Side Mount Airbag. Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1995 Ford indicates Driver Side Side Mount Airbag Low Resistance On Squib.
- Common causes
- Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1995 Ford Description
What are the Possible Causes of the DTC B1995 Ford?
- Faulty Driver Side Side Mount Airbag
- Driver Side Side Mount Airbag harness is open or shorted
- Driver Side Side Mount Airbag circuit poor electrical connection
- Faulty Restraints Control Module (RCM)
How to Fix the DTC B1995 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1995 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1995 Ford code?
Need more information on how to fix the B1995 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1995 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1995 Ford Code
1. What are the common symptoms of OBDII code B1995 in a Ford related to the driver side side mount airbag low resistance on squib?
The common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the driver side side mount airbag.
2. What are the possible causes of OBDII code B1995 in a Ford indicating driver side side mount airbag low resistance on squib?
The code B1995 in a Ford typically indicates issues such as faulty wiring connections, damaged wiring harness, or a defective driver side airbag squib.
3. How can I diagnose the OBDII code B1995 for the driver side side mount airbag low resistance on squib in my Ford?
To diagnose this issue, you may need to conduct a thorough inspection of the wiring harness, connectors, and the driver side airbag squib using a multimeter to check for continuity and resistance.
4. Are there any safety precautions to consider when dealing with OBDII code B1995 in a Ford related to the driver side side mount airbag issue?
When working on issues related to airbags, it is crucial to disconnect the vehicle's battery and wait for a specified amount of time to discharge any residual power to prevent accidental deployment of the airbags.
5. Can I repair the OBDII code B1995 for driver side side mount airbag low resistance on squib in my Ford by myself?
While some DIY enthusiasts may attempt to repair this issue, it is recommended to seek assistance from a qualified mechanic or automotive technician due to the complexity and safety considerations involved in airbag systems.
6. Is it safe to drive my Ford with OBDII code B1995 indicating driver side side mount airbag low resistance on squib?
It is not recommended to drive the vehicle until the issue is resolved, as the driver side airbag may not deploy properly in the event of a collision, compromising occupant safety.
7. How much does it typically cost to repair OBDII code B1995 in a Ford related to driver side side mount airbag low resistance on squib?
The cost of repairing this issue can vary depending on the extent of the damage and the labor rates in your area. It is advisable to obtain quotes from different repair shops for an accurate estimate.
8. Can resetting the OBDII code B1995 in a Ford resolve the driver side side mount airbag low resistance on squib issue?
Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the low resistance on the driver side side mount airbag squib. It is essential to address the root cause of the issue.
9. Are there any recalls or technical service bulletins (TSBs) related to OBDII code B1995 in Ford vehicles with driver side side mount airbag low resistance on squib?
It is recommended to check with your local Ford dealership or online resources to see if there are any recalls or TSBs related to this specific issue, as manufacturers may provide assistance for certain cases.
10. How long does it typically take to repair OBDII code B1995 for driver side side mount airbag low resistance on squib in a Ford?
The repair time can vary depending on the exact cause of the issue and the availability of parts. In general, it may take a few hours to a full day to diagnose and repair the problem correctly.
Discuss the causes and fixes for B1995 Ford OBDII Code
Code B1995 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
