B1676 Code - Battery Pack Voltage Out Of Range
Quick Answer
Fused battery voltage and fused ignition voltage are supplied to the Anti-lock Brake System (ABS) module from battery junction box fuses. Common causes include Blown Anti-lock Brake System (ABS) Fuse, ABS module harness is open or shorted, ABS module connector poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1676 indicates Battery Pack Voltage Out Of Range.
- Common causes
- Common causes include Blown Anti-lock Brake System (ABS) Fuse, ABS module harness is open or shorted, ABS module connector poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1676 Description
What are the Possible Causes of the DTC B1676?
- Blown Anti-lock Brake System (ABS) Fuse
- ABS module harness is open or shorted
- ABS module connector poor electrical connection.
- Faulty charging system (Alternator)
- Faulty ABS module
How to Fix the DTC B1676?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1676 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1676 code?
Need more information on how to fix the B1676 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1676 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1676 Chrysler — Power Liftgate Latch Release Ratchet Secondary Switch Performance
- B1676 Dodge — Power Liftgate Latch Release Ratchet Secondary Switch Performance
- B1676 Ford — Battery Pack Voltage Out Of Range
- B1676 Jeep — Power Liftgate Latch Release Ratchet Secondary Switch Performance
- B1676 Lexus — Lost Communication With Rear Floor Airbag Sensor RH
- B1676 Lincoln — Battery Pack Voltage Out Of Range
- B1676 Mercury — Battery Pack Voltage Out Of Range
- B1676 RAM — Power Liftgate Latch Release Ratchet Secondary Switch Performance
- B1676 Scion — Lost Communication With Rear Floor Airbag Sensor RH
- B1676 Toyota — Lost Communication With Rear Floor Airbag Sensor RH
Frequently Asked Questions about B1676 Code
1. What are the common symptoms of OBDII code B1676 (Battery Pack Voltage Out Of Range)?
- Common symptoms include erratic or fluctuating battery pack voltage readings on the vehicle's display, decreased energy efficiency, and potential issues with charging or discharging the battery.
2. What are the possible causes of OBDII code B1676?
- Causes of this code may include a malfunctioning battery management system, faulty battery pack cells, loose or corroded battery connections, or issues with the charging system.
3. How can I diagnose the source of OBDII code B1676?
- To diagnose this code, it's recommended to perform a thorough inspection of the battery pack, check for loose or corroded connections, conduct a battery voltage test, and use a diagnostic scan tool to gather more detailed information.
4. Can I still drive my vehicle with OBDII code B1676 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the battery pack and potentially affect the vehicle's performance and safety.
5. How can I repair OBDII code B1676?
- Repairing this code may involve addressing the underlying cause, such as replacing faulty battery pack cells, repairing or replacing the battery management system, or fixing any loose or corroded connections.
6. Is it safe to reset the OBDII code B1676 on my own?
- While you can attempt to clear the code using an OBDII scanner, it's important to first address the root cause of the issue to prevent the code from reoccurring and potentially causing more serious problems.
7. How much does it typically cost to repair OBDII code B1676?
- The cost of repairing this code can vary depending on the specific issue causing it, the extent of the repairs needed, and whether the work is done at a dealership or an independent repair shop. It's best to obtain a few quotes for an accurate estimate.
8. Can a DIY enthusiast fix OBDII code B1676 at home?
- While some aspects of diagnosing and repairing this code may be possible for experienced DIY enthusiasts, it's generally recommended to seek professional help, especially when dealing with high-voltage components like the battery pack.
9. What long-term effects can OBDII code B1676 have on my vehicle if left unresolved?
- Ignoring this code can lead to decreased battery performance, potential damage to other electrical components, reduced fuel efficiency, and even the risk of the battery pack failing completely.
10. Are there any preventive maintenance tips to avoid OBDII code B1676 in the future?
- Regularly inspecting and maintaining the battery pack, keeping connections clean and tight, following the manufacturer's recommended maintenance schedule, and avoiding deep discharges can help prevent issues that may trigger this code.
Discuss the causes and fixes for B1676 OBDII Code
-
WHAT in da HELL are they talking about? Are they talking about the "main" battery or is there another one that I'm not aware of??
-
According to the service manual, the B1676 code is set when the Anti-Lock Brake System (ABS) module detects system voltage is less than 9 volts or grater than 19 volts for more than 8 seconds. In other words if the battery voltage is too low or the alternator is not charging properly the B1676 code will set.
-
Oh, so it's not necessarily a bad sensor. It could be the main battery. Ok well I had to be jumped twice in the past month.
-
I'm kinda thinking the same thing. I almost wonder if it could be the cause of some other system problems that are going on.
-
So I'm getting this error on my 2006 Ford Explorer. I just changed both the battery and alternator in the last week, and everything else on the system seems to be in working order, but I'm still getting this error code. Further, I'm getting some odd behavior from my ABS system - it tries to engage ABS the first time I hit the brakes after starting the car, and then my ABS and anti-slip lights come on. How can I further troubleshoot this issue? Thanks.
-
did you ever figure out a fix for this? My car is doing this every time i first turn the vehicle on. and then after pumping the brakes a bit, it goes away, i got this code along with the u3003 code. Thanks
-
The P1676 code means that the ABS control module is getting the incorrect voltage. For you model year the factory recommends check the followign:
- Fuse(s)
- Wiring, terminals or connectors
- Charging system
- ABS moduleIf your have low charging or blown fuse, the U0253 code may be related to the same problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
