B1482 Code - Wiper Washer Fluid Level Sensor Circuit Short To Ground
Quick Answer
The Body Control Module (BCM) monitors the Wiper Washer Fluid Level Sensor. Common causes include Faulty Wiper Washer Fluid Level Sensor, Wiper Washer Fluid Level Sensor harness is open or shorted, Wiper Washer Fluid Level Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1482 indicates Wiper Washer Fluid Level Sensor Circuit Short To Ground.
- Common causes
- Common causes include Faulty Wiper Washer Fluid Level Sensor, Wiper Washer Fluid Level Sensor harness is open or shorted, Wiper Washer Fluid Level Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1482 Description
What are the Possible Causes of the DTC B1482?
- Faulty Wiper Washer Fluid Level Sensor
- Wiper Washer Fluid Level Sensor harness is open or shorted
- Wiper Washer Fluid Level Sensor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1482?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1482 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1482 code?
Need more information on how to fix the B1482 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1482 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1482 Chrysler — Channel 7 Audio Speaker Output Circuit Shorted Together
- B1482 Dodge — Channel 7 Audio Speaker Output Circuit Shorted Together
- B1482 Hyundai — 2nd Stage Driver Airbag Resistance Too Low
- B1482 Jeep — Channel 7 Audio Speaker Output Circuit Shorted Together
- B1482 KIA — 2nd Stage Driver Airbag Resistance Too Low
- B1482 RAM — Channel 7 Audio Speaker Output Circuit Shorted Together
Frequently Asked Questions about B1482 Code
1. What does OBDII code B1482 mean?
Code B1482 indicates a short to ground in the wiper washer fluid level sensor circuit, meaning there is an electrical fault preventing proper sensor operation.
2. What are common symptoms of code B1482?
Typical symptoms include an incorrect or constant low washer fluid warning on the dashboard and possibly non-functional or intermittent wiper washer systems.
3. What causes the B1482 code to trigger?
The main causes are damaged wiring, a short to ground, a faulty washer fluid level sensor, or corrosion in the sensor’s electrical connector.
4. Can I drive with the B1482 code?
Yes, you can drive with this code, but it’s best to address it promptly since it may affect your ability to monitor washer fluid levels correctly.
5. How do I diagnose the B1482 code?
Start by visually inspecting the washer fluid level sensor, wiring, and connectors for damage or corrosion. Use a multimeter to test for shorts or continuity issues.
6. How can I fix the B1482 code?
Repair or replace damaged wiring, clean corroded connectors, and replace the washer fluid level sensor if it’s faulty.
7. How much does it cost to repair a B1482 code?
Repair costs vary but typically range from $50 to $150, depending on whether wiring repairs or sensor replacement is needed.
8. Can a blown fuse cause the B1482 code?
While uncommon, a blown fuse in the washer system circuit could contribute to this issue. Verify all related fuses are intact.
9. Does clearing the B1482 code fix the problem?
Clearing the code will turn off the warning temporarily, but if the issue isn’t resolved, the code and symptoms will return.
10. Can extreme weather cause the B1482 code?
Yes, extreme weather can exacerbate wiring insulation wear or cause moisture intrusion, leading to a short in the sensor circuit.
Discuss the causes and fixes for B1482 OBDII Code
Code B1482 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
