AutoCodes – Generic – B1297

B1297 Code - Park Assist Sensor 10

Quick Answer

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1297 indicates Park Assist Sensor 10.
Common causes: Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,250

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1297 Description

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.

OBDII Code B1297 - Park Assist Sensor 10 - AutoCodes.com — B1297 Code - Park Assist Sensor 10

What does this mean?

What are the Possible Causes of the DTC B1297?

Faulty Park Assist Sensor 10
Park Assist Sensor 10 harness is open or shorted
Park Assist Sensor 10 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1297?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1297-11 PTS SENSOR 10 CIRCUIT SHORT TO GROUND
B1297-12 PTS SENSOR 10 CIRCUIT SHORT TO BATTERY
B1297-25 PTS SENSOR 10 SIGNAL SHAPE / WAVEFORM FAILURE
B1297-92 PTS SENSOR 10 PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1297 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1297 code?

Need more information on how to fix the B1297 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1297 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1297 Chrysler — Park Assist Sensor 10
B1297 Dodge — Park Assist Sensor 10
B1297 Jeep — Park Assist Sensor 10
B1297 RAM — Park Assist Sensor 10

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1297 Code

1. What does OBDII code B1297 mean?

Code B1297 refers to a fault with Park Assist Sensor 10, indicating an issue with the specific sensor responsible for detecting obstacles during parking.

2. What are the common symptoms of code B1297?

Symptoms include a malfunctioning parking assist system, warnings on the dashboard, and reduced or no audible alerts when approaching obstacles.

3. What causes the B1297 code?

The code may be caused by a faulty Park Assist Sensor 10, damaged wiring or connectors, dirt or debris blocking the sensor, or an issue with the Park Assist control module.

4. Can dirt or debris cause the B1297 code?

Yes, dirt, ice, or debris blocking the sensor can prevent it from functioning properly and trigger the B1297 code.

5. How can I diagnose the B1297 code?

Start by visually inspecting Sensor 10 for damage or obstructions, check the wiring and connectors for corrosion or breaks, and use a diagnostic tool to confirm the fault location.

6. How do you fix the B1297 code?

Clean the sensor if dirty, repair or replace damaged wires or connectors, and replace the sensor if it's faulty. If the issue persists, inspect the Park Assist control module.

7. Can I drive with the B1297 code active?

Yes, you can drive with the B1297 code, but your Park Assist system may not function correctly, increasing the risk of parking collisions.

8. How much does it cost to repair a Park Assist Sensor?

Replacing a Park Assist Sensor typically costs between $100 and $300, depending on the vehicle make and model. Labor costs may vary.

9. Can a faulty Park Assist control module cause the B1297 code?

Yes, if the control module malfunctions, it can impact communication with Sensor 10 and trigger the B1297 code.

10. How can I prevent the B1297 code from recurring?

Regularly clean your Park Assist sensors, avoid pressure washing them directly, and inspect wiring for signs of wear or damage.

Discuss the causes and fixes for B1297 OBDII Code

Submit a New Comment

Code B1297 comments

No comments found for this page.

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.