B1297 Chrysler Code - Park Assist Sensor 10
Quick Answer
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B1297 Chrysler indicates Park Assist Sensor 10.
- Common causes
- Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B1297 Chrysler Description
What are the Possible Causes of the DTC B1297 Chrysler?
- Faulty Park Assist Sensor 10
- Park Assist Sensor 10 harness is open or shorted
- Park Assist Sensor 10 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B1297 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1297-12 PTS SENSOR 10 CIRCUIT SHORT TO BATTERY
B1297-25 PTS SENSOR 10 SIGNAL SHAPE / WAVEFORM FAILURE
B1297-92 PTS SENSOR 10 PERFORMANCE OR INCORRECT OPERATION
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1297 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1297 Chrysler code?
Need more information on how to fix the B1297 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1297 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1297 Chrysler Code
1. What are the common symptoms of OBDII code B1297 in a Chrysler related to the Park Assist Sensor 10?
The common symptoms include a non-functional or erratic behavior of the Park Assist system, leading to difficulty in parking or navigating tight spaces.
2. What are the possible causes of OBDII code B1297 in a Chrysler related to the Park Assist Sensor 10?
The code B1297 typically indicates a fault with Park Assist Sensor 10, which could be due to sensor damage, wiring issues, or a faulty control module.
3. How can I diagnose the issue causing OBDII code B1297 related to the Park Assist Sensor 10 in my Chrysler?
To diagnose the problem, you can visually inspect the sensor for physical damage, check the wiring connections for any signs of wear or corrosion, and use a diagnostic scanner to read the specific fault codes.
4. Can I repair OBDII code B1297 related to the Park Assist Sensor 10 in my Chrysler on my own?
Depending on the exact cause, you may be able to replace the faulty sensor or repair the wiring yourself if you have the necessary tools and expertise. However, complex issues may require professional assistance.
5. Are there any temporary fixes or workarounds for OBDII code B1297 related to the Park Assist Sensor 10 in a Chrysler?
While temporary fixes may not be recommended, you can try resetting the system by disconnecting the car battery for a few minutes and then reconnecting it to see if the code clears.
6. Is it safe to continue driving my Chrysler with OBDII code B1297 related to the Park Assist Sensor 10 illuminated?
It is generally safe to drive the vehicle with this code, but it is important to address the underlying issue promptly to ensure the proper functioning of the Park Assist system.
7. How much does it typically cost to repair OBDII code B1297 related to the Park Assist Sensor 10 in a Chrysler?
The cost of repair can vary depending on the exact cause of the issue, but it may involve replacement of the sensor, repair of wiring, or reprogramming of the control module, which could range from moderate to high cost.
8. Can extreme weather conditions affect the operation of the Park Assist Sensor 10 in a Chrysler and trigger OBDII code B1297?
Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can potentially affect the operation of the sensor, leading to false readings and triggering the OBDII code B1297.
9. How long does it usually take to repair OBDII code B1297 related to the Park Assist Sensor 10 in a Chrysler?
The repair time can vary depending on the exact cause of the issue and the complexity of the repair process. It could take anywhere from a few hours to a full day to fix the problem.
10. Can regular maintenance help prevent OBDII code B1297 related to the Park Assist Sensor 10 in a Chrysler?
Regular inspection of the Park Assist system components, including sensors and wiring, can help identify potential issues early on and prevent the occurrence of OBDII code B1297.
Discuss the causes and fixes for B1297 Chrysler OBDII Code
Code B1297 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
