AutoCodes – Generic – B1250

B1250 Code - Combination Switch Control Unit

Quick Answer

The Multiplex Control Unit Module (MICU) monitors the Combination Switch Control Unit. Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
B1250 indicates Combination Switch Control Unit.
Common causes
Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,385
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 29, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B1250 Description

The Multiplex Control Unit Module (MICU) monitors the Combination Switch Control Unit. The MICU sets the OBDII code when the Combination Switch Control Unit is not to factory specifications.
OBDII Code B1250 - Combination Switch Control Unit - AutoCodes.com
B1250 Code - Combination Switch Control Unit

What are the Possible Causes of the DTC B1250?

  • Faulty Combination Switch Control Unit
  • Combination Switch Control Unit harness is open or shorted
  • Combination Switch Control Unit circuit poor electrical connection

How to Fix the DTC B1250?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1250 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1250 code?

Need more information on how to fix the B1250 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1250 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1250 Code

1. What does the OBDII code B1250 mean?

B1250 refers to a fault in the combination switch control unit, which typically manages functions like headlights, turn signals, and wipers.

2. What are common symptoms of the B1250 code?

Symptoms may include malfunctioning headlights, turn signals, wipers not responding, or intermittent operation of these systems.

3. What causes the B1250 code to appear?

Common causes include a faulty combination switch, damaged wiring or connectors, or a malfunction in the control module itself.

4. Can a loose connection trigger the B1250 code?

Yes, loose or corroded electrical connections in the combination switch circuit can trigger this code.

5. How is the B1250 code diagnosed?

A technician will inspect the combination switch, check for damaged wiring or connectors, and use a scan tool to confirm the fault and test the related circuits.

6. Can I still drive my car with the B1250 code active?

While the vehicle may still be drivable, safety functions like turn signals or headlights may not work properly, making it unsafe to drive in certain conditions.

7. How do you fix the B1250 code?

Repairs may include replacing the combination switch, repairing or replacing damaged wiring, or reprogramming or replacing the control unit if necessary.

8. Is the B1250 code expensive to fix?

Repair costs depend on the specific issue, but replacing a combination switch typically costs between $150 and $400, including labor.

9. Can I fix the B1250 code myself?

If you're comfortable working with electrical systems, you can inspect and replace the combination switch or check for damaged wiring. However, advanced diagnostics may require professional tools.

10. Does the B1250 code require a system reset after repair?

Yes, after addressing the fault, the code may need to be cleared using an OBDII scanner to ensure the issue is resolved.

Discuss the causes and fixes for B1250 OBDII Code

Code B1250 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play