AutoCodes – Honda – B1250 Honda

B1250 Honda Code - Combination Switch Control Unit

Quick Answer

The Multiplex Control Unit Module (MICU) monitors the Combination Switch Control Unit. Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1250 Honda indicates Combination Switch Control Unit.
Common causes: Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,621

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1250 Honda Description

The Multiplex Control Unit Module (MICU) monitors the Combination Switch Control Unit. The MICU sets the OBDII code when the Combination Switch Control Unit is not to factory specifications.

OBDII Code B1250 Honda - Combination Switch Control Unit - AutoCodes.com — B1250 Honda Code - Combination Switch Control Unit

What does this mean?

What are the Possible Causes of the DTC B1250 Honda?

Faulty Combination Switch Control Unit
Combination Switch Control Unit harness is open or shorted
Combination Switch Control Unit circuit poor electrical connection

How to Fix the DTC B1250 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1250 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1250 Honda code?

Need more information on how to fix the B1250 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1250 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1250 Honda Code

1. What does OBDII code B1250 for Honda indicate?

The B1250 code in a Honda refers to an issue with the Combination Switch Control Unit, typically related to a fault in the control unit's circuit.

2. What symptoms might I experience with a B1250 error code?

Common symptoms of a B1250 code in a Honda include non-functional turn signals, malfunctioning wipers, or issues with other controls on the combination switch.

3. What are the possible causes of a B1250 error code in a Honda?

Potential causes of a B1250 code include a defective combination switch control unit, wiring issues, blown fuses, or a faulty connection within the control unit system.

4. How can I diagnose a B1250 error code in my Honda?

To diagnose a B1250 code, a mechanic will typically use a scan tool to retrieve the specific fault code and then inspect the combination switch control unit, wiring, and related components for any visible damage or issues.

5. Can I repair a B1250 error code in my Honda myself?

Repairing a B1250 code often requires advanced diagnostic skills and knowledge of automotive electrical systems. It is recommended to seek professional assistance to accurately diagnose and repair the issue.

6. Is it safe to continue driving with a B1250 error code in my Honda?

Continuing to drive with a B1250 code may result in non-functioning essential controls like turn signals or wipers, which can compromise safety. It is best to address the issue promptly to ensure proper operation of these components.

7. How much does it typically cost to repair a B1250 error code in a Honda?

The cost of repairing a B1250 code can vary depending on the exact cause of the issue, the extent of the damage, and the labor rates of the repair shop. It is advisable to obtain quotes from multiple mechanics for an accurate estimate.

8. Can a B1250 error code be related to other vehicle problems in a Honda?

While the B1250 code specifically points to an issue with the Combination Switch Control Unit, it is possible for related problems in the vehicle's electrical system to trigger this error code.

9. Are there any preventive measures to avoid encountering a B1250 error code in a Honda?

Regular maintenance checks, including inspecting the combination switch and wiring for any signs of wear or damage, can help prevent issues that may lead to a B1250 error code in a Honda.

10. How long does it typically take to repair a B1250 error code in a Honda?

The time required to repair a B1250 code can vary depending on the complexity of the issue and the availability of replacement parts. In some cases, the repair may be completed within a few hours, while more extensive repairs could take longer.