B0113 Code - Short To Positive In Right-Side Air Bag Module Squib Circuit
Quick Answer
The side air bag module squib circuit consists of the air bag sensor assembly and side air bag module. Common causes include Faulty Right-Side Air Bag Module, Right-Side Air Bag Module harness is open or shorted, Right-Side Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0113 indicates Short To Positive In Right-Side Air Bag Module Squib Circuit.
- Common causes
- Common causes include Faulty Right-Side Air Bag Module, Right-Side Air Bag Module harness is open or shorted, Right-Side Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0113 Description
What are the Possible Causes of the DTC B0113?
- Faulty Right-Side Air Bag Module
- Right-Side Air Bag Module harness is open or shorted
- Right-Side Air Bag Module circuit poor electrical connection
- Faulty Air Bag Control Module
How to Fix the DTC B0113?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0113 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0113 code?
Need more information on how to fix the B0113 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0113 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B0113 Lexus — Short To Positive In Right-Side Air Bag Module Squib Circuit
- B0113 Scion — Short To Positive In Right-Side Air Bag Module Squib Circuit
- B0113 Toyota — Short To Positive In Right-Side Air Bag Module Squib Circuit
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0113 Code
1. What are the common symptoms of OBDII code B0113?
- Common symptoms include the airbag warning light illuminating on the dashboard and possible loss of function of the right-side airbag.
2. What does the OBDII code B0113 "Short To Positive In Right-Side Air Bag Module Squib Circuit" mean?
- This code indicates a short circuit to positive voltage in the right-side airbag module's squib circuit, which could impact the proper deployment of the airbag in the event of a collision.
3. What are the possible causes of OBDII code B0113?
- Possible causes include damaged wiring in the right-side airbag circuit, a faulty airbag squib module, or a malfunctioning airbag control module.
4. How can I diagnose the issue related to OBDII code B0113?
- Diagnose the issue by conducting a thorough inspection of the right-side airbag circuit, checking for damaged wiring, testing the airbag squib module, and scanning the airbag control module for fault codes.
5. Is it safe to drive with OBDII code B0113 triggered?
- It is not recommended to drive with this code triggered, as it indicates a potential issue with the right-side airbag system, which could compromise your safety in the event of a collision.
6. How can I repair OBDII code B0113?
- Repair involves identifying and fixing the short circuit to positive in the right-side airbag module squib circuit, which may require replacing damaged wiring, repairing or replacing the airbag squib module, or addressing issues with the airbag control module.
7. Can I reset OBDII code B0113 without fixing the underlying issue?
- Resetting the code without addressing the underlying issue is not recommended, as the problem may persist and compromise the proper function of the right-side airbag system.
8. Are there any DIY tips for troubleshooting OBDII code B0113?
- DIY tips include visually inspecting the airbag circuit for damaged wiring, checking the airbag squib module for continuity, and using an OBDII scanner to read and clear the fault code.
9. How much does it cost to fix OBDII code B0113 at a repair shop?
- The cost of fixing this code at a repair shop can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. It is recommended to get a diagnosis and estimate from a professional technician.
10. Can OBDII code B0113 be intermittent?
- Yes, this code can sometimes be intermittent if the short circuit in the right-side airbag module squib circuit is sporadic. It is still important to diagnose and address the issue to ensure proper airbag functionality.
Discuss the causes and fixes for B0113 OBDII Code
Code B0113 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
