B0096 Code - Right Side Restraints Sensor 1
Quick Answer
The Restraints Control Module (RCM) monitors all of Supplemental Restraint System (SRS) device connections. Common causes include Faulty Right Side Restraints Sensor 1, Right Side Restraints Sensor 1 harness is open or shorted, Right Side Restraints Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0096 indicates Right Side Restraints Sensor 1.
- Common causes
- Common causes include Faulty Right Side Restraints Sensor 1, Right Side Restraints Sensor 1 harness is open or shorted, Right Side Restraints Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0096 Description
What are the Possible Causes of the DTC B0096?
- Faulty Right Side Restraints Sensor 1
- Right Side Restraints Sensor 1 harness is open or shorted
- Right Side Restraints Sensor 1 circuit poor electrical connection
How to Fix the DTC B0096?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0096 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0096 code?
Need more information on how to fix the B0096 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0096 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B0096 Ford — Right Side Restraints Sensor 1
- B0096 Infiniti — Front Side Air Bag Satellite Sensor Right
- B0096 Lincoln — Right Side Restraints Sensor 1
- B0096 Mercury — Right Side Restraints Sensor 1
- B0096 Nissan — Front Side Air Bag Satellite Sensor Right
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0096 Code
1. What does OBDII code B0096 mean?
The OBDII code B0096 refers to a problem with the Right Side Restraints Sensor 1 in the vehicle's airbag system.
2. What are the common symptoms of OBDII code B0096?
Common symptoms of OBDII code B0096 may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's functionality.
3. What are the possible causes of OBDII code B0096?
Possible causes of OBDII code B0096 include a faulty Right Side Restraints Sensor 1, damaged wiring or connectors related to the sensor, or issues with the airbag control module.
4. How can I diagnose the issue related to OBDII code B0096?
Diagnosing the issue related to OBDII code B0096 typically involves using an OBDII scanner to read the code, checking the sensor and its connections for damage, and performing a thorough inspection of the airbag system components.
5. Is it safe to drive with OBDII code B0096 present?
It is not recommended to drive with OBDII code B0096 present, as it indicates a potential problem with the airbag system that could affect its performance in the event of an accident.
6. Can I reset OBDII code B0096 and make it go away?
Resetting OBDII code B0096 may temporarily turn off the warning light, but the underlying issue with the Right Side Restraints Sensor 1 will still need to be addressed to prevent it from recurring.
7. How can I repair OBDII code B0096?
Repairing OBDII code B0096 involves identifying the specific cause of the issue, whether it's a faulty sensor, damaged wiring, or another component, and then replacing or repairing the affected part accordingly.
8. Are there any DIY tips for troubleshooting OBDII code B0096?
While some basic troubleshooting steps can be taken, diagnosing and repairing OBDII code B0096 often requires specialized tools and knowledge, so it's best to consult a professional mechanic for assistance.
9. How much does it cost to fix OBDII code B0096?
The cost of fixing OBDII code B0096 can vary depending on the specific cause of the issue, the extent of the damage, and the labor rates in your area. It's recommended to get a diagnosis from a mechanic to determine the exact cost.
10. Can OBDII code B0096 affect the vehicle's overall safety?
Yes, OBDII code B0096 can affect the vehicle's overall safety, as it indicates a potential problem with the airbag system, which is a crucial safety feature designed to protect occupants in the event of a collision.
Discuss the causes and fixes for B0096 OBDII Code
Code B0096 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
