C2125 Toyota Code - No Signal from Transmitter ID 5 In Main Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2125 Toyota indicates No Signal from Transmitter ID 5 In Main Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2125 Toyota Description
The Tire Pressure Warning Valve and Transmitters constantly send radio waves to the Tire Pressure Warning ECU and Receiver.
Under the conditions below, the Tire Pressure Warning ECU and Receiver is unable to receive the signals from the Tire Pressure Warning Valve and Transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire, wheel, and/or transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2125 Toyota?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning ECU and Receiver
How to Fix the DTC C2125 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2125 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2125 Toyota code?
Need more information on how to fix the C2125 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2125 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- C2125 2013 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
- C2125 2014 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
- C2125 2015 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
- C2125 2016 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
- C2125 2017 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
- C2125 2018 Toyota RAV4 — No Signal from Transmitter ID 5 In Main Mode
Frequently Asked Questions about C2125 Toyota Code
1. What are the common symptoms of OBDII code C2125 in a Toyota?
- Common symptoms include the TPMS (Tire Pressure Monitoring System) light illuminating on the dashboard and possible issues with monitoring tire pressure.
2. What can cause the OBDII code C2125 in a Toyota?
- The code C2125 is typically triggered by a malfunction in the Tire Pressure Monitoring System due to a lack of signal from the transmitter ID 5 in main mode.
3. How can I diagnose the issue related to the OBDII code C2125 in my Toyota?
- To diagnose the issue, it is recommended to check the tire pressure of all tires, inspect the TPMS sensors, and ensure they are functioning properly.
4. Can a faulty TPMS sensor cause the OBDII code C2125 in a Toyota?
- Yes, a faulty TPMS sensor, specifically transmitter ID 5, not transmitting signals properly can trigger the code C2125.
5. Are there any DIY repair tips for fixing the OBDII code C2125 in a Toyota?
- DIY repair tips may include checking and adjusting tire pressure, inspecting the TPMS sensors for damage or corrosion, and resetting the TPMS system.
6. What is the significance of transmitter ID 5 in the OBDII code C2125 for a Toyota?
- Transmitter ID 5 is a specific TPMS sensor responsible for transmitting tire pressure data to the vehicle's computer. A lack of signal from this transmitter can cause the code C2125.
7. Can driving with the OBDII code C2125 in a Toyota be dangerous?
- While driving with the code C2125 may not pose an immediate safety risk, it is important to address the issue promptly to ensure proper functioning of the TPMS system for monitoring tire pressure.
8. Is it necessary to visit a mechanic for resolving the OBDII code C2125 in a Toyota?
- While it is recommended to consult a mechanic for a thorough diagnosis and repair of the TPMS system, some basic checks and repairs can be done at home if you are familiar with automotive maintenance.
9. How can I reset the TPMS system after resolving the OBDII code C2125 in my Toyota?
- After fixing the issue causing the code C2125, you can typically reset the TPMS system by following the manufacturer's instructions, which may involve using a TPMS tool or following a specific procedure.
10. Will fixing the OBDII code C2125 in a Toyota require replacing the TPMS sensors?
- Depending on the underlying issue causing the code C2125, it may or may not be necessary to replace the TPMS sensor associated with transmitter ID 5. Diagnosing the specific problem will help determine the appropriate course of action.
Discuss the causes and fixes for C2125 Toyota OBDII Code
Code C2125 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
