C2125 2018 Toyota RAV4 Code - No Signal from Transmitter ID 5 In Main Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2125 2018 Toyota RAV4 indicates No Signal from Transmitter ID 5 In Main Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2125 2018 Toyota RAV4 Description
The Tire Pressure Warning Valve and Transmitters constantly send radio waves to the Tire Pressure Warning ECU and Receiver.
Under the conditions below, the Tire Pressure Warning ECU and Receiver is unable to receive the signals from the Tire Pressure Warning Valve and Transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire, wheel, and/or transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2125 2018 Toyota RAV4?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning ECU and Receiver
How to Fix the DTC C2125 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2125 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2125 2018 Toyota RAV4 code?
Need more information on how to fix the C2125 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2125 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2125 2018 Toyota RAV4 Code
1. What does OBDII code C2125 mean for a 2018 Toyota RAV4?
The code C2125 indicates a problem with the communication signal from Transmitter ID 5 in Main Mode in the tire pressure monitoring system (TPMS) of a 2018 Toyota RAV4.
2. What are the common symptoms of OBDII code C2125 in a 2018 Toyota RAV4?
Common symptoms of OBDII code C2125 include the TPMS warning light staying illuminated on the dashboard and a potential loss of tire pressure monitoring functionality.
3. What are the possible causes of OBDII code C2125 in a 2018 Toyota RAV4?
Possible causes of code C2125 include a faulty tire pressure sensor, issues with the TPMS module, wiring problems, or low tire pressure in one or more tires.
4. How can I diagnose the cause of OBDII code C2125 in my 2018 Toyota RAV4?
Diagnosing code C2125 may involve using a TPMS diagnostic tool to check the sensor readings, inspecting the wiring for damage, verifying tire pressures, and ensuring the TPMS module is functioning correctly.
5. Can I still drive my 2018 Toyota RAV4 with OBDII code C2125 illuminated?
While it is generally safe to drive with the code C2125 present, it is recommended to address the issue promptly to ensure proper tire pressure monitoring functionality and safety.
6. How can I clear OBDII code C2125 from my 2018 Toyota RAV4?
Clearing code C2125 can be done using an OBDII scanner or by fixing the underlying issue that triggered the code, which should automatically reset the TPMS system.
7. Is it possible to reset the TPMS system in a 2018 Toyota RAV4 after fixing the issue causing OBDII code C2125?
Yes, after resolving the problem causing code C2125, the TPMS system can typically be reset by following the manufacturer's recommended procedure, often involving driving the vehicle for a set distance.
8. Can a DIY enthusiast repair OBDII code C2125 in a 2018 Toyota RAV4?
Depending on the cause of code C2125, some DIY enthusiasts may be able to address the issue themselves by replacing a faulty sensor, checking wiring connections, or resetting the TPMS system.
9. Will OBDII code C2125 cause any permanent damage to my 2018 Toyota RAV4 if left untreated?
Leaving code C2125 unaddressed may result in degraded TPMS functionality, potentially impacting tire pressure monitoring accuracy, but it should not cause permanent damage to the vehicle.
10. How much does it typically cost to repair OBDII code C2125 in a 2018 Toyota RAV4?
The cost of repairing code C2125 in a 2018 Toyota RAV4 can vary depending on the cause of the issue, with expenses ranging from a simple sensor replacement to more extensive repairs involving the TPMS module or wiring.
Discuss the causes and fixes for C2125 2018 Toyota RAV4 OBDII Code
Code C2125 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
