C146B Toyota Code - SRL Solenoid Circuit
Quick Answer
The SRL Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C146B Toyota indicates SRL Solenoid Circuit.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C146B Toyota Description
What are the Possible Causes of the DTC C146B Toyota?
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C146B Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C146B Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C146B Toyota code?
Need more information on how to fix the C146B Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C146B Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- C146B 2013 Toyota RAV4 — SRL Solenoid Circuit
- C146B 2014 Toyota RAV4 — SRL Solenoid Circuit
- C146B 2015 Toyota RAV4 — SRL Solenoid Circuit
- C146B 2016 Toyota RAV4 — SRL Solenoid Circuit
- C146B 2017 Toyota RAV4 — SRL Solenoid Circuit
- C146B 2018 Toyota RAV4 — SRL Solenoid Circuit
Frequently Asked Questions about C146B Toyota Code
1. What are the common symptoms of OBDII code C146B in a Toyota related to the SRL Solenoid Circuit?
- Some common symptoms include rough shifting, transmission slippage, and the vehicle going into limp mode.
2. What are the possible causes of OBDII code C146B in a Toyota related to the SRL Solenoid Circuit?
- The code may be triggered by issues such as a faulty SRL solenoid, damaged wiring or connectors, low transmission fluid level, or a malfunctioning transmission control module.
3. How can I diagnose the SRL Solenoid Circuit issue causing OBDII code C146B in my Toyota?
- You can start by checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the SRL solenoid for proper operation, and scanning the transmission control module for any related fault codes.
4. Can I continue driving my Toyota with OBDII code C146B related to the SRL Solenoid Circuit?
- It is not recommended to continue driving the vehicle with this code present, as it can lead to further damage to the transmission and other components.
5. How can I repair OBDII code C146B related to the SRL Solenoid Circuit in my Toyota?
- Repair options may include replacing the faulty SRL solenoid, repairing or replacing damaged wiring or connectors, ensuring the transmission fluid level is correct, and resetting the fault code with a diagnostic tool.
6. Are there any DIY tips for troubleshooting OBDII code C146B in a Toyota related to the SRL Solenoid Circuit?
- While some basic checks like inspecting the wiring and connectors can be done DIY, diagnosing and repairing the SRL solenoid circuit issue may require advanced tools and expertise best handled by a professional mechanic.
7. How much does it typically cost to repair OBDII code C146B in a Toyota related to the SRL Solenoid Circuit?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars, including parts and labor.
8. Can a SRL Solenoid Circuit issue causing OBDII code C146B affect the overall performance of my Toyota?
- Yes, a malfunctioning SRL solenoid circuit can cause transmission issues leading to poor performance, decreased fuel efficiency, and potential damage to the transmission system if not addressed promptly.
9. Will resetting the OBDII code C146B related to the SRL Solenoid Circuit in my Toyota make the issue go away?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed, it is likely to reappear once the vehicle is driven again.
10. Can regular maintenance help prevent OBDII code C146B related to the SRL Solenoid Circuit in my Toyota?
- Regular transmission fluid checks and changes, along with timely inspections of the transmission system during routine maintenance, can help prevent issues that may trigger the SRL Solenoid Circuit fault code.
Discuss the causes and fixes for C146B Toyota OBDII Code
Code C146B Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
