C146B 2013 Toyota RAV4 Code - SRL Solenoid Circuit
Quick Answer
The SRL Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C146B 2013 Toyota RAV4 indicates SRL Solenoid Circuit.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C146B 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC C146B 2013 Toyota RAV4?
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C146B 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C146B 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C146B 2013 Toyota RAV4 code?
Need more information on how to fix the C146B 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C146B 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C146B 2013 Toyota RAV4 Code
1. What does OBDII code C146B for a 2013 Toyota RAV4 indicate?
The C146B code on a 2013 Toyota RAV4 refers to a fault in the SRL (Shift Range Learning) solenoid circuit.
2. What are the common symptoms of a SRL Solenoid Circuit issue in a Toyota RAV4?
Common symptoms of a SRL Solenoid Circuit problem in a Toyota RAV4 may include harsh shifting, transmission slippage, or the transmission not shifting properly.
3. What are the possible causes of the C146B trouble code in a 2013 Toyota RAV4?
Possible causes of the C146B code in a 2013 Toyota RAV4 include faulty SRL solenoid, damaged wiring or connectors in the circuit, low transmission fluid level, or a malfunctioning transmission control module.
4. How can I diagnose a SRL Solenoid Circuit problem in my 2013 Toyota RAV4?
Diagnosing a SRL Solenoid Circuit issue in a 2013 Toyota RAV4 typically involves checking the transmission fluid level, inspecting the wiring and connectors for damage, and performing a scan tool test to pinpoint the exact cause.
5. Can I continue driving my Toyota RAV4 with the C146B trouble code present?
It is not recommended to continue driving your Toyota RAV4 with the C146B trouble code present, as it can lead to further damage to the transmission if left unresolved.
6. How do I repair a SRL Solenoid Circuit issue in my 2013 Toyota RAV4?
Repairing a SRL Solenoid Circuit problem in a 2013 Toyota RAV4 may involve replacing the faulty solenoid, repairing damaged wiring or connectors, topping up transmission fluid, or reprogramming the transmission control module.
7. Is it necessary to reset the OBDII code after fixing a SRL Solenoid Circuit problem in a Toyota RAV4?
Yes, it is recommended to reset the OBDII code after fixing a SRL Solenoid Circuit issue in a Toyota RAV4 to clear the fault code and ensure the problem has been successfully addressed.
8. How much does it typically cost to repair a SRL Solenoid Circuit issue in a 2013 Toyota RAV4?
The cost of repairing a SRL Solenoid Circuit problem in a 2013 Toyota RAV4 can vary depending on the exact cause of the issue, but it may range from $200 to $600 including parts and labor.
9. Can a DIY enthusiast fix a SRL Solenoid Circuit problem in a Toyota RAV4?
While some DIY enthusiasts may have the skills to diagnose and repair a SRL Solenoid Circuit problem in a Toyota RAV4, it is recommended to seek professional help due to the complexity of transmission-related issues.
10. How often does the SRL Solenoid Circuit issue occur in a 2013 Toyota RAV4?
The SRL Solenoid Circuit issue in a 2013 Toyota RAV4 is not extremely common, but it can occur due to various factors such as age, mileage, and maintenance history of the vehicle.
Discuss the causes and fixes for C146B 2013 Toyota RAV4 OBDII Code
Code C146B 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
