AutoCodes – Generic – C1320

C1320 Code - Sensor 4 Wrong Type Installed

Quick Answer

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 4, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1320 indicates Sensor 4 Wrong Type Installed.
Common causes: Common causes include Faulty TPMS Sensor 4, Faulty TPM Receiver Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,563

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1320 Description

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. The TPM Receiver Module sets the OBDII code when the TPMS Sensor is not to factory specifications. This DTC indicates that the sensor has either failed to learn OR has successfully learned and the receiver did not receive messages from the learned sensor for 12 minutes.

OBDII Code C1320 - Sensor 4 Wrong Type Installed - AutoCodes.com — C1320 Code - Sensor 4 Wrong Type Installed

What does this mean?

What are the Possible Causes of the DTC C1320?

Faulty TPMS Sensor 4
Faulty TPM Receiver Module

How to Fix the DTC C1320?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1320 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1320 code?

Need more information on how to fix the C1320 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1320 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C1320 Hyundai — Sensor 4 Wrong Type Installed
C1320 KIA — Sensor 4 Wrong Type Installed

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1320 Code

1. What are the common symptoms of OBDII code C1320 (Sensor 4 Wrong Type Installed)?

The common symptoms of code C1320 include issues with the vehicle's traction control system, ABS system, and potential illumination of the ABS warning light on the dashboard.

2. What could cause OBDII code C1320 to be triggered?

Code C1320 is typically triggered when the Electronic Control Unit (ECU) detects that the wrong type of sensor has been installed in the designated Sensor 4 location within the vehicle's ABS system.

3. How can I diagnose OBDII code C1320?

Diagnosing code C1320 involves using a diagnostic scanner to retrieve the specific fault code, checking the sensor type installed in Sensor 4, and verifying compatibility with the vehicle's specifications.

4. Can a DIY enthusiast repair OBDII code C1320 at home?

Repairing code C1320 may require advanced automotive diagnostic tools and knowledge, making it challenging for DIY enthusiasts. It is recommended to consult a professional mechanic for accurate diagnosis and repair.

5. What are the possible repair options for OBDII code C1320?

Repair options for code C1320 may include removing and replacing the incorrect sensor with the appropriate sensor type, resetting the fault code, and testing the ABS system to ensure proper functionality.

6. Is it safe to continue driving with OBDII code C1320 active?

It is not recommended to drive with an active C1320 fault code, as it may affect the vehicle's traction control and ABS systems, compromising safety and overall driving performance.

7. How long does it typically take to repair OBDII code C1320?

The repair time for code C1320 can vary depending on the availability of parts, the complexity of the sensor replacement, and diagnostic procedures. It is best to consult with a mechanic for a more accurate timeframe.

8. Are there any preventive measures to avoid OBDII code C1320 in the future?

To prevent code C1320, ensure that only compatible and appropriate sensors are installed in the designated locations within the vehicle's ABS system, and conduct regular maintenance checks to detect any issues early on.

9. Can OBDII code C1320 be intermittent or permanent?

Code C1320 can be either intermittent or permanent, depending on the underlying cause and whether the issue is resolved. Intermittent codes may come and go, while permanent codes require immediate attention and repair.

10. Will resetting the fault code resolve OBDII code C1320 permanently?

Resetting the fault code may temporarily clear the warning light, but it will not permanently resolve code C1320 if the underlying issue, such as the wrong sensor type installed, is not addressed and corrected.