AutoCodes – Hyundai – C1320 Hyundai

C1320 Hyundai Code - Sensor 4 Wrong Type Installed

Quick Answer

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 4, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1320 Hyundai indicates Sensor 4 Wrong Type Installed.
Common causes: Common causes include Faulty TPMS Sensor 4, Faulty TPM Receiver Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,379

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1320 Hyundai Description

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. The TPM Receiver Module sets the OBDII code when the TPMS Sensor is not to factory specifications. This DTC indicates that the sensor has either failed to learn OR has successfully learned and the receiver did not receive messages from the learned sensor for 12 minutes.

OBDII Code C1320 Hyundai - Sensor 4 Wrong Type Installed - AutoCodes.com — C1320 Hyundai Code - Sensor 4 Wrong Type Installed

What does this mean?

What are the Possible Causes of the DTC C1320 Hyundai?

Faulty TPMS Sensor 4
Faulty TPM Receiver Module

How to Fix the DTC C1320 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1320 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1320 Hyundai code?

Need more information on how to fix the C1320 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1320 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1320 Hyundai Code

1. What are the common symptoms of OBDII code C1320 in a Hyundai vehicle?

- Common symptoms of OBDII code C1320 (Sensor 4 Wrong Type Installed) in a Hyundai may include issues with the vehicle's stability control system, traction control system, or ABS system.

2. What could cause the OBDII code C1320 (Sensor 4 Wrong Type Installed) to appear in a Hyundai?

- The code C1320 in a Hyundai is typically triggered when the wrong type of sensor is installed or when there is a mismatch between the sensor type and the vehicle's specifications.

3. How can I diagnose the OBDII code C1320 in my Hyundai?

- To diagnose the OBDII code C1320 in your Hyundai, you may need to use a diagnostic scanner to retrieve the specific fault code. Additionally, checking the sensor connections and their compatibility with the vehicle's requirements is crucial.

4. Can I continue driving my Hyundai with the OBDII code C1320 present?

- It is not recommended to continue driving your Hyundai with the OBDII code C1320 present, as it may affect the performance of critical safety systems like stability control and ABS.

5. What is the repair process for fixing OBDII code C1320 in a Hyundai?

- The repair process for OBDII code C1320 in a Hyundai typically involves identifying the incorrect sensor type, replacing it with the correct sensor, and clearing the fault code using a diagnostic scanner.

6. Are there any DIY tips for resolving the OBDII code C1320 in a Hyundai?

- DIY tips for resolving OBDII code C1320 in a Hyundai may include double-checking the sensor type and ensuring proper installation. However, for accurate diagnosis and repair, it is recommended to consult a professional mechanic.

7. How much does it cost to fix the OBDII code C1320 in a Hyundai?

- The cost of fixing OBDII code C1320 in a Hyundai can vary depending on the specific issue, parts needed for replacement, and labor charges. It is advisable to obtain quotes from local mechanics or Hyundai service centers.

8. Can a faulty sensor cause other issues in addition to triggering the OBDII code C1320 in a Hyundai?

- Yes, a faulty sensor that triggers the OBDII code C1320 in a Hyundai can potentially cause issues with the vehicle's stability control, traction control, and ABS systems, affecting overall driving safety.

9. How long does it take to repair the OBDII code C1320 issue in a Hyundai?

- The repair time for the OBDII code C1320 in a Hyundai can vary depending on the extent of the problem and the availability of parts. In general, it may take a few hours to a day for diagnosis and repair.

10. Is it possible to prevent the occurrence of OBDII code C1320 in a Hyundai?

- While some instances of OBDII code C1320 in a Hyundai may be unpredictable, ensuring proper maintenance, using genuine parts, and following manufacturer guidelines for sensor installations can help prevent such issues.