AutoCodesGeneric – C110F

C110F Code - Right Rear Damper Solenoid

Quick Answer

The Vehicle Dynamics Module (VDM) sends a variable voltage to the damper solenoids based on sensor input and HS-CAN messages. Common causes include Faulty Right Rear Damper Solenoid, Right Rear Damper Solenoid harness is open or shorted, Right Rear Damper Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C110F indicates Right Rear Damper Solenoid.
Common causes
Common causes include Faulty Right Rear Damper Solenoid, Right Rear Damper Solenoid harness is open or shorted, Right Rear Damper Solenoid circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,835
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C110F Description

The Vehicle Dynamics Module (VDM) sends a variable voltage to the damper solenoids based on sensor input and HS-CAN messages. The VDM continually monitors the damper solenoid circuits and sets a DTC when a circuit fault is detected. A shorted or open damper solenoid also causes the VDM to set a DTC.
OBDII Code C110F - Right Rear Damper Solenoid - AutoCodes.com
C110F Code - Right Rear Damper Solenoid

What are the Possible Causes of the DTC C110F?

  • Faulty Right Rear Damper Solenoid
  • Right Rear Damper Solenoid harness is open or shorted
  • Right Rear Damper Solenoid circuit poor electrical connection

How to Fix the DTC C110F?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C110F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C110F code?

Need more information on how to fix the C110F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C110F code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C110F Code

1. What does the OBDII code C110F mean?

The C110F code indicates a problem with the right rear damper solenoid, which is part of the vehicle's adaptive suspension system.

2. What are the symptoms of code C110F?

Common symptoms include a rough or bouncy ride, suspension warning lights on the dashboard, and reduced handling performance.

3. What causes the C110F code to appear?

Typical causes include a faulty damper solenoid, damaged wiring or connectors, or issues with the suspension control module.

4. Can I drive with the C110F code?

While the vehicle may be drivable, the compromised suspension can affect handling and comfort, so it’s best to address the issue promptly.

5. How is C110F diagnosed?

A mechanic will inspect the right rear damper solenoid, check for wiring or connector damage, and use a scan tool to confirm the fault.

6. How do I fix the C110F code?

Repairs may include replacing the right rear damper solenoid, repairing or replacing damaged wiring, or reprogramming the suspension control module.

7. What tools are needed to fix a C110F code?

Common tools include a diagnostic scanner, multimeter, and possibly specialized suspension tools for solenoid replacement.

8. How much does it cost to repair the C110F code?

Repair costs can range from $200 to $800 or more, depending on whether the solenoid, wiring, or control module needs replacement.

9. Can a C110F code be caused by a software issue?

Yes, outdated or corrupted software in the suspension control module can trigger this code, though it’s less common than hardware issues.

10. How can I prevent the C110F code from recurring?

Regularly inspect suspension components and wiring for wear, and follow the manufacturer’s maintenance schedule for the adaptive suspension system.

Discuss the causes and fixes for C110F OBDII Code

Code C110F comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play