AutoCodes – Generic – C100C

C100C Code - Steering Tracking

Quick Answer

The Power Steering Control Module (PSCM) continually monitors and adjusts steering efforts based on the torque sensor inputs to enhance feel of the steering system. Common causes include Steering Angle Sensor Calibration, Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C100C indicates Steering Tracking.
Common causes: Common causes include Steering Angle Sensor Calibration, Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,692

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C100C Description

The Power Steering Control Module (PSCM) continually monitors and adjusts steering efforts based on the torque sensor inputs to enhance feel of the steering system. Compensation is made to reduce the effect of pull or drift that may be experienced when driving on roads with a high degree of camber. If the level of compensation required to keep the vehicle driving straight ahead exceeds a pre set level a DTC will be set.

OBDII Code C100C - Steering Tracking - AutoCodes.com — C100C Code - Steering Tracking

What does this mean?

What are the Possible Causes of the DTC C100C?

Steering Angle Sensor Calibration
Faulty Steering Angle Sensor
Steering Angle Sensor harness is open or shorted
Steering Angle Sensor circuit poor electrical connection

How to Fix the DTC C100C?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C100C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C100C code?

Need more information on how to fix the C100C code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C100C code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C100C Ford — Steering Tracking
C100C Lincoln — Steering Tracking
C100C Mercury — Steering Tracking

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C100C Code

1. What is OBDII code C100C related to steering tracking?

- OBDII code C100C is a code that indicates an issue with the steering tracking system in a vehicle.

2. What are the common symptoms of OBDII code C100C?

- Common symptoms of OBDII code C100C include steering wheel misalignment, steering wheel vibration, and difficulty maintaining a straight line while driving.

3. What are the possible causes of OBDII code C100C?

- Possible causes of OBDII code C100C include a faulty steering angle sensor, misaligned steering components, or issues with the vehicle's suspension system.

4. How can I diagnose OBDII code C100C?

- Diagnosing OBDII code C100C typically involves using a diagnostic scan tool to read the code and checking the steering components and sensors for any issues or malfunctions.

5. Can I continue driving with OBDII code C100C present?

- It is not recommended to continue driving with OBDII code C100C present, as it can affect the vehicle's steering performance and safety.

6. How can OBDII code C100C be repaired?

- Repairing OBDII code C100C may involve recalibrating the steering angle sensor, realigning the steering components, or replacing any faulty sensors or components.

7. Is it necessary to reset the OBDII code C100C after repairs?

- Yes, it is important to reset the OBDII code C100C after repairs have been made to clear the code from the vehicle's system.

8. Can OBDII code C100C be triggered by a loose steering wheel?

- Yes, a loose steering wheel can contribute to triggering OBDII code C100C as it can lead to misalignment and tracking issues.

9. Are there any DIY fixes for OBDII code C100C?

- DIY fixes for OBDII code C100C may include checking and tightening loose steering components, but more complex issues may require professional diagnosis and repair.

10. How can I prevent OBDII code C100C from occurring?

- Regular maintenance of the steering system, including alignment checks and sensor inspections, can help prevent OBDII code C100C from occurring.