B3060 GMC Code - Unprogrammed Transponder Identification Code Received Malfunction
Quick Answer
When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3060 GMC indicates Unprogrammed Transponder Identification Code Received Malfunction.
- Common causes
- Common causes include Faulty Key, Faulty Immobilizer Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3060 GMC Description
What are the Possible Causes of the DTC B3060 GMC?
- Faulty Key
- Faulty Immobilizer Control Module
How to Fix the DTC B3060 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3060 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3060 GMC code?
Need more information on how to fix the B3060 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3060 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- B3060 2014 GMC Sierra — Unprogrammed Transponder Identification Code Received Malfunction
- B3060 2015 GMC Sierra — Unprogrammed Transponder Identification Code Received Malfunction
- B3060 2016 GMC Sierra — Unprogrammed Transponder Identification Code Received Malfunction
- B3060 2017 GMC Sierra — Unprogrammed Transponder Identification Code Received Malfunction
- B3060 2018 GMC Sierra — Unprogrammed Transponder Identification Code Received Malfunction
Frequently Asked Questions about B3060 GMC Code
1. What are the common symptoms of OBDII code B3060 GMC?
- Common symptoms include difficulty starting the vehicle, the engine stalling, and the key not turning in the ignition.
2. What are some possible causes of the Unprogrammed Transponder Identification Code Received Malfunction (B3060) in a GMC?
- Possible causes include a faulty transponder key, a malfunctioning transponder receiver, or issues with the vehicle's immobilizer system.
3. How can I diagnose OBDII code B3060 in my GMC vehicle?
- Diagnosis typically involves using a scan tool to read the trouble codes, inspecting the transponder key and receiver, and checking the immobilizer system for any faults.
4. Can I still drive my GMC with the B3060 trouble code present?
- It is not recommended to drive the vehicle with the B3060 code present, as it can lead to starting and stalling issues that may leave you stranded.
5. What should I do if my GMC displays the B3060 code?
- It is advisable to have the issue diagnosed and repaired by a qualified mechanic to prevent further problems with starting and driving the vehicle.
6. Will resetting the trouble codes make the B3060 code go away permanently?
- Resetting the trouble codes may temporarily clear the B3060 code, but if the underlying issue is not fixed, the code is likely to reappear.
7. How much does it typically cost to repair the Unprogrammed Transponder Identification Code Received Malfunction in a GMC?
- The cost of repairs can vary depending on the specific cause of the issue, but it may involve replacing the transponder key, receiver, or reprogramming the immobilizer system.
8. Can I fix the B3060 code in my GMC myself, or do I need a professional mechanic?
- While some DIY enthusiasts may be able to address simpler causes like a dead battery in the transponder key, more complex issues should be handled by a professional mechanic.
9. Is the Unprogrammed Transponder Identification Code Received Malfunction a serious problem in a GMC?
- Yes, this code can lead to starting and driving issues, so it is important to address it promptly to avoid being stranded or damaging the vehicle.
10. How long does it typically take to repair the B3060 code in a GMC?
- The repair time can vary depending on the cause of the issue, but it may take anywhere from a few hours to a day to diagnose and fix the problem.
Discuss the causes and fixes for B3060 GMC OBDII Code
Code B3060 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
