AutoCodes – GMC – B3060 2016 GMC Sierra

B3060 2016 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 2016 GMC Sierra indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 210

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 2016 GMC Sierra Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 2016 GMC Sierra - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 2016 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 2016 GMC Sierra?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 2016 GMC Sierra code?

Need more information on how to fix the B3060 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 2016 GMC Sierra Code

1. What does OBDII code B3060 mean on a 2016 GMC Sierra?

Code B3060 indicates that the vehicle's security system has detected an unprogrammed or incorrect transponder key being used to start the vehicle.

2. What are the common symptoms of B3060 in a 2016 GMC Sierra?

Symptoms include the engine not starting, the security light staying illuminated on the dashboard, and possible error messages related to the anti-theft system.

3. What causes the B3060 code to appear on a GMC Sierra?

The primary causes are using an unprogrammed or incorrect key, a malfunctioning transponder chip in the key, or issues with the vehicle's theft deterrent system.

4. How can I fix the B3060 code on my 2016 GMC Sierra?

Fixing this code typically involves reprogramming the transponder key, replacing a faulty key, or addressing issues with the vehicle's theft deterrent module.

5. Can I clear the B3060 code without fixing the issue?

Clearing the code without resolving the underlying issue will not fix the problem, and the code is likely to reappear until the cause is addressed.

6. Do I need to replace my key if I get the B3060 code?

Not necessarily. If the key is not damaged, it may only need to be reprogrammed. However, if the transponder chip is faulty, key replacement may be required.

7. How do I reprogram a transponder key for a 2016 GMC Sierra?

Reprogramming typically requires a professional locksmith or dealership with the proper equipment to reset and program the key to the vehicle's anti-theft system.

8. Can a dead key fob battery cause the B3060 code?

No, a dead fob battery generally does not trigger the B3060 code, as itâ€™s related to the transponder chip in the key, not the remote functions.

9. Is the B3060 code related to the ignition system?

Yes, the code can be related to the ignition system if the theft deterrent module or transponder communication is disrupted.

10. How much does it cost to fix the B3060 code on a 2016 GMC Sierra?

The cost varies depending on whether reprogramming or key replacement is required. Reprogramming typically costs $50â€“$150, while new keys might cost $150â€“$300 or more, depending on the type.