B25C7 Code - Driver Door Ajar Switch 2 Circuit Low
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects a fault with the Secondary Driver Door Ajar Switch signal received over the CAN C BUS from the Body Control Module (BCM). Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B25C7 indicates Driver Door Ajar Switch 2 Circuit Low.
- Common causes
- Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B25C7 Description
What are the Possible Causes of the DTC B25C7?
- Faulty Driver Door Ajar Switch 2
- Driver Door Ajar Switch 2 harness is open or shorted
- Driver Door Ajar Switch 2 circuit poor electrical connection
- Faulty Left Front Door Latch Assembly
- Faulty Body Control Module (BCM)
How to Fix the DTC B25C7?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B25C7 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B25C7 code?
Need more information on how to fix the B25C7 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B25C7 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B25C7 Chrysler — Driver Door Ajar Switch 2 Circuit Low
- B25C7 Dodge — Driver Door Ajar Switch 2 Circuit Low
- B25C7 Jeep — Driver Door Ajar Switch 2 Circuit Low
- B25C7 RAM — Driver Door Ajar Switch 2 Circuit Low
Frequently Asked Questions about B25C7 Code
1. What does the OBDII code B25C7 mean?
The B25C7 code indicates a low voltage issue in the Driver Door Ajar Switch 2 Circuit, responsible for detecting if the driver’s door is open or closed.
2. What are the common symptoms of the B25C7 code?
Symptoms may include the door ajar warning light staying on, interior lights not turning off, and the vehicle alarm system triggering unexpectedly.
3. What causes the B25C7 code to appear?
Common causes include a faulty door ajar switch, damaged wiring or connectors in the circuit, or a malfunctioning body control module (BCM).
4. Can I still drive my car with the B25C7 code?
Yes, you can drive the car, but issues like battery drain from interior lights staying on or alarm malfunctions may arise if the problem isn’t resolved.
5. How can I troubleshoot the B25C7 code?
Start by inspecting the driver door ajar switch and related wiring for damage or corrosion. Use a multimeter to check voltage and continuity in the circuit.
6. How do I fix the B25C7 code?
Repairs may include replacing the driver door ajar switch, repairing damaged wires or connectors, or reprogramming or replacing the BCM if necessary.
7. How much does it cost to fix the B25C7 code?
The repair cost depends on the issue. Replacing a door ajar switch typically costs $50–$150, while BCM repairs or replacements can range from $300–$800.
8. Can a weak battery cause the B25C7 code?
A weak or failing battery can sometimes cause electrical issues, but it’s not a common cause of the B25C7 code specifically.
9. Will clearing the code fix the problem?
Clearing the code will erase it temporarily, but if the underlying issue isn’t resolved, the code will reappear.
10. Do I need a professional to fix the B25C7 code?
If you’re comfortable working with electrical components, you can attempt repairs yourself. Otherwise, it’s best to consult a qualified mechanic.
Discuss the causes and fixes for B25C7 OBDII Code
Code B25C7 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
